Johannes Erdfelt escribi�:
> On Wed, Apr 26, 2000, Jose Juan Zapater <[EMAIL PROTECTED]> wrote:
> > > > Brad Hards escribi�:
> > > >
> > > > Do you know this problem?
> > > >
> > > > The kernel log:
> > > > Apr 25 21:22:44 compila kernel: Product: 7 Port Multifunction Hub
> > > > Apr 25 21:22:44 compila kernel: hub.c: USB hub found
> > > > Apr 25 21:22:44 compila kernel: hub.c: 9 ports detected
> > > > <7>hub.c: local power source is good
> > > > <7>hub.c: no over-current condition existsApr 25 21:22:44 compila kernel:
> > > > Manufacturer: FTDI
> > > > <7>hub.c: enabling power on all ports
> > > > Apr 25 21:22:52 compila kernel: usb.c: USB disconnect on device 3
> > > > Apr 25 21:24:12 compila kernel: usb.c: USB new device connect, assigned
> > > > device number 3
> > >
> > > That looks perfectly fine. Are there any messages after this? You may
> > > need to wait 5 or 10 seconds.
> >
> > With the uhci module there are not any message, but with I have probed
> > with the usb-uhci module and this is the log:
>
> What do you mean "there are not any message" with the uhci module?
>
That the JE driver don't show any message wrong.
>
> Does everything work fine?
No, any device is detected plugged to the hub.
>
> Does it only detect the hub?
>
> Does it detect the hub and no device insertions are detected.
Yes, only detect the hub. It doesn't detect any hub-port (there are 7) and
nothing multiport (keyboard,mouse,com)
>
> > > Also, are you saying the hub is not detected correctly or that any
> > > devices connected to it are not detected correctly?
> >
> > I have connected a keyboard (+PS2) without problems to root hub.
> > And the hub connect a camera Avermedia elite and a ethernet device not
> > supported (Kawasaki chip)
>
> The kawasaki chip has a new driver. It works successfully for me.
>
I don't still probed.
>
> > > What's most interesting about this is that it's a real 9 port hub. Some
> > > of the ports may be fixed, but it's more than 7 ports. This is what I
> > > was lookin for atleast.
> >
> > Need help. Do you want any special test with my configuration?
>
> Quite possibly.
>
> I'd like to get a better idea of what the problem is before we change
> anything.
>
> JE
I hope that my answers help you something to your questions.
JJ
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
