This device is not supported. It is not complaint to the USB Mass Storage
specification. I'm trying to get SCM to release the specs for this device
(and many others), but it is slow going.
I highly recommend getting one of the new SDDR-31 units from SanDisk. It
was designed to be compatible with Linux.
Matt Dharm
On Tue, 9 May 2000, Jesper Angelo wrote:
>
> Hi,
>
> I got a flashcard reader from a company calles SCM (Delivered with my Nikon
> Coolpix camera). I tried following the description for installing the reader,
> but i never reach the point where the device is supposed to register itself as
> a scsi host.
>
> It recognizes the device as a new USB device when loading the usb-storage
> module, but responds with:
>
> -----
> May 9 02:02:56 styx kernel: Manufacturer: Shuttle Technology Inc.
> May 9 02:02:56 styx kernel: Product: E-USB Bridge
> May 9 02:02:56 styx kernel: ov511: probing for device...
> May 9 02:02:56 styx kernel: usb.c: unhandled interfaces on device
> May 9 02:02:56 styx kernel: usb.c: This device is not recognized by
> any installed USB driver.
> -----
>
> I tried probing around the source and maillist archive and found something
> about "unusual devices", but I cannot figure out where to register this one.
>
> The USB system is working, my Creative Webcam3 is working without problems at
> all.
>
> Could anyone perhaps point me in the right direction?
>
> yours,
>
> Jesper Angelo
> Denmark
>
>
> ---
>
>
> May 9 02:02:55 styx kernel: usb-uhci.c: $Revision: 1.50 $ time 01:39:21 May 8
> 2000
> May 9 02:02:55 styx kernel: usb-uhci.c: High bandwidth mode enabled
> May 9 02:02:55 styx kernel: usb-uhci.c: Intel USB controller: setting latency
> timer to 0
> May 9 02:02:55 styx kernel: usb-uhci.c: Detected 2 ports
> May 9 02:02:56 styx kernel: usb.c: new USB bus registered, assigned bus number
> 1
> May 9 02:02:56 styx kernel: usb.c: USB new device connect, assigned device
> number 1
> May 9 02:02:56 styx kernel: usb.c: kmalloc IF c78fb220, numif 1
> May 9 02:02:56 styx kernel: usb.c: new device strings: Mfr=0, Product=0,
> SerialNumber=0
> May 9 02:02:56 styx kernel: ov511: probing for device...
> May 9 02:02:56 styx kernel: hub.c: USB hub found
> May 9 02:02:56 styx kernel: hub.c: 2 ports detected
> May 9 02:02:56 styx kernel: hub.c: ganged power switching
> May 9 02:02:56 styx kernel: hub.c: standalone hub
> May 9 02:02:56 styx kernel: hub.c: global over-current protection
> May 9 02:02:56 styx kernel: hub.c: power on to power good time: 2ms
> May 9 02:02:56 styx kernel: hub.c: hub controller current requirement: 0mA
> May 9 02:02:56 styx kernel: hub.c: port 1 is removable
> May 9 02:02:56 styx kernel: hub.c: port 2 is removable
> May 9 02:02:56 styx kernel: hub.c: local power source is good
> May 9 02:02:56 styx kernel: hub.c: no over-current condition exists
> May 9 02:02:56 styx kernel: hub.c: enabling power on all ports
> May 9 02:02:56 styx kernel: usb.c: usb-bandwidth-alloc: was: 0, new: 17,
> bustime = 17 us, Pipe allowed: yes
> May 9 02:02:56 styx kernel: usb.c: bw_alloc bumped to 17 for 1 requesters
> May 9 02:02:56 styx kernel: usb.c: hub driver claimed interface c78fb220
> May 9 02:02:56 styx kernel: hub.c: port 2 connection change
> May 9 02:02:56 styx kernel: hub.c: portstatus 101, change 1, High Speed
> May 9 02:02:56 styx kernel: hub.c: portstatus 103, change 0, High Speed
> May 9 02:02:56 styx kernel: usb.c: USB new device connect, assigned device
> number 2
> May 9 02:02:56 styx kernel: usb.c: kmalloc IF c298ce80, numif 1
> May 9 02:02:56 styx kernel: usb.c: new device strings: Mfr=1, Product=2,
> SerialNumber=0
> May 9 02:02:56 styx kernel: usb.c: USB device number 2 default language ID
> 0x409
> May 9 02:02:56 styx kernel: Manufacturer: Shuttle Technology Inc.
> May 9 02:02:56 styx kernel: Product: E-USB Bridge
> May 9 02:02:56 styx kernel: ov511: probing for device...
> May 9 02:02:56 styx kernel: usb.c: unhandled interfaces on device
> May 9 02:02:56 styx kernel: usb.c: This device is not recognized by any
> installed USB driver.
> May 9 02:02:56 styx kernel: Length = 18
> May 9 02:02:56 styx kernel: DescriptorType = 01
> May 9 02:02:56 styx kernel: USB version = 1.00
> May 9 02:02:56 styx kernel: Vendor:Product = 066b:0103
> May 9 02:02:56 styx kernel: MaxPacketSize0 = 64
> May 9 02:02:56 styx kernel: NumConfigurations = 1
> May 9 02:02:56 styx kernel: Device version = 2.00
> May 9 02:02:56 styx kernel: Device Class:SubClass:Protocol = 00:00:00
> May 9 02:02:56 styx kernel: Per-interface classes
> May 9 02:02:56 styx kernel: Configuration:
>
> ---------------------------------------------------------------------
> To unsubscribe, e-mail: [EMAIL PROTECTED]
> For additional commands, e-mail: [EMAIL PROTECTED]
>
--
Matthew Dharm Home: [EMAIL PROTECTED]
Senior Engineer, QCP Inc. Work: [EMAIL PROTECTED]
NYET! The evil stops here!
-- Pitr
User Friendly, 6/22/1998
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
