Thank you so much...was going crazy there for a second :-)
I'll write SCM myself and push from the other side (we got quite many of these
readers inhouse...)
J-
On 09-May-2000 Matthew Dharm wrote:
> This device is not supported. It is not complaint to the USB Mass Storage
> specification. I'm trying to get SCM to release the specs for this device
> (and many others), but it is slow going.
>
> I highly recommend getting one of the new SDDR-31 units from SanDisk. It
> was designed to be compatible with Linux.
>
> Matt Dharm
>
> On Tue, 9 May 2000, Jesper Angelo wrote:
>
>>
>> Hi,
>>
>> I got a flashcard reader from a company calles SCM (Delivered with my Nikon
>> Coolpix camera). I tried following the description for installing the
>> reader,
>> but i never reach the point where the device is supposed to register itself
>> as
>> a scsi host.
>>
>> It recognizes the device as a new USB device when loading the usb-storage
>> module, but responds with:
>>
>> -----
>> May 9 02:02:56 styx kernel: Manufacturer: Shuttle Technology Inc.
>> May 9 02:02:56 styx kernel: Product: E-USB Bridge
>> May 9 02:02:56 styx kernel: ov511: probing for device...
>> May 9 02:02:56 styx kernel: usb.c: unhandled interfaces on device
>> May 9 02:02:56 styx kernel: usb.c: This device is not recognized by
>> any installed USB driver.
>> -----
>>
>> I tried probing around the source and maillist archive and found something
>> about "unusual devices", but I cannot figure out where to register this one.
>>
>> The USB system is working, my Creative Webcam3 is working without problems
>> at
>> all.
>>
>> Could anyone perhaps point me in the right direction?
>>
>> yours,
>>
>> Jesper Angelo
>> Denmark
>>
>>
>> ---
>>
>>
>> May 9 02:02:55 styx kernel: usb-uhci.c: $Revision: 1.50 $ time 01:39:21 May
>> 8
>> 2000
>> May 9 02:02:55 styx kernel: usb-uhci.c: High bandwidth mode enabled
>> May 9 02:02:55 styx kernel: usb-uhci.c: Intel USB controller: setting
>> latency
>> timer to 0
>> May 9 02:02:55 styx kernel: usb-uhci.c: Detected 2 ports
>> May 9 02:02:56 styx kernel: usb.c: new USB bus registered, assigned bus
>> number
>> 1
>> May 9 02:02:56 styx kernel: usb.c: USB new device connect, assigned device
>> number 1
>> May 9 02:02:56 styx kernel: usb.c: kmalloc IF c78fb220, numif 1
>> May 9 02:02:56 styx kernel: usb.c: new device strings: Mfr=0, Product=0,
>> SerialNumber=0
>> May 9 02:02:56 styx kernel: ov511: probing for device...
>> May 9 02:02:56 styx kernel: hub.c: USB hub found
>> May 9 02:02:56 styx kernel: hub.c: 2 ports detected
>> May 9 02:02:56 styx kernel: hub.c: ganged power switching
>> May 9 02:02:56 styx kernel: hub.c: standalone hub
>> May 9 02:02:56 styx kernel: hub.c: global over-current protection
>> May 9 02:02:56 styx kernel: hub.c: power on to power good time: 2ms
>> May 9 02:02:56 styx kernel: hub.c: hub controller current requirement: 0mA
>> May 9 02:02:56 styx kernel: hub.c: port 1 is removable
>> May 9 02:02:56 styx kernel: hub.c: port 2 is removable
>> May 9 02:02:56 styx kernel: hub.c: local power source is good
>> May 9 02:02:56 styx kernel: hub.c: no over-current condition exists
>> May 9 02:02:56 styx kernel: hub.c: enabling power on all ports
>> May 9 02:02:56 styx kernel: usb.c: usb-bandwidth-alloc: was: 0, new: 17,
>> bustime = 17 us, Pipe allowed: yes
>> May 9 02:02:56 styx kernel: usb.c: bw_alloc bumped to 17 for 1 requesters
>> May 9 02:02:56 styx kernel: usb.c: hub driver claimed interface c78fb220
>> May 9 02:02:56 styx kernel: hub.c: port 2 connection change
>> May 9 02:02:56 styx kernel: hub.c: portstatus 101, change 1, High Speed
>> May 9 02:02:56 styx kernel: hub.c: portstatus 103, change 0, High Speed
>> May 9 02:02:56 styx kernel: usb.c: USB new device connect, assigned device
>> number 2
>> May 9 02:02:56 styx kernel: usb.c: kmalloc IF c298ce80, numif 1
>> May 9 02:02:56 styx kernel: usb.c: new device strings: Mfr=1, Product=2,
>> SerialNumber=0
>> May 9 02:02:56 styx kernel: usb.c: USB device number 2 default language ID
>> 0x409
>> May 9 02:02:56 styx kernel: Manufacturer: Shuttle Technology Inc.
>> May 9 02:02:56 styx kernel: Product: E-USB Bridge
>> May 9 02:02:56 styx kernel: ov511: probing for device...
>> May 9 02:02:56 styx kernel: usb.c: unhandled interfaces on device
>> May 9 02:02:56 styx kernel: usb.c: This device is not recognized by any
>> installed USB driver.
>> May 9 02:02:56 styx kernel: Length = 18
>> May 9 02:02:56 styx kernel: DescriptorType = 01
>> May 9 02:02:56 styx kernel: USB version = 1.00
>> May 9 02:02:56 styx kernel: Vendor:Product = 066b:0103
>> May 9 02:02:56 styx kernel: MaxPacketSize0 = 64
>> May 9 02:02:56 styx kernel: NumConfigurations = 1
>> May 9 02:02:56 styx kernel: Device version = 2.00
>> May 9 02:02:56 styx kernel: Device Class:SubClass:Protocol = 00:00:00
>> May 9 02:02:56 styx kernel: Per-interface classes
>> May 9 02:02:56 styx kernel: Configuration:
>>
>> ---------------------------------------------------------------------
>> To unsubscribe, e-mail: [EMAIL PROTECTED]
>> For additional commands, e-mail: [EMAIL PROTECTED]
>>
>
> --
> Matthew Dharm Home: [EMAIL PROTECTED]
> Senior Engineer, QCP Inc. Work: [EMAIL PROTECTED]
>
> NYET! The evil stops here!
> -- Pitr
> User Friendly, 6/22/1998
>
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
