At 18.38 16/05/00 +0200, you wrote:
>II've take the 2.3.99 kernel and compile it with the USB support. I've a
>hub with my monitor (LG Flatron 795FT) with a printer (Epson 740) and a
>WebCam (Creative WebCam Go!) attached.
>Unfortunatly i'm not able to get them work. I've read the USB Guide and the
>USB how-to, but nothing. I've tried to make usblp0 and then to configure it
>with the Mandrake printer tool, but when I try to print nothing appen.
>
I reply only to remember that I wrote to the list a few days ago, with a
similiar problem: I also have a LG Flatron 795FT (Plus) monitor, with a
hub, that doesn't want to work... At the moment I use USB mouse and
keyboard without passing through the monitor's hub (with the mouse
connnected on a socket situated on the keyboard, connected to the root
hub), but I also would like to find a solution to this problem, in order to
add other USB devices to my system.
My kernel message, with usb-2.3.99-pre6-7-for-2.2.14 applied on 2.2.14
kernel, was the following:
[root@localhost /root]# dmesg
Linux version 2.2.14 ([EMAIL PROTECTED]) (gcc version 2.95.2
19991024 (
release)) #1 sab apr 29 10:50:13 CEST 2000
Detected 381177624 Hz processor.
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb.c: registered new driver hid
usb-ohci.c: USB OHCI at membase 0xc4000000, IRQ 5
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb.c: USB new device connect, assigned device number 2
hub.c: USB hub found
that seems rather poor, compared to your one. So, I'll download kernel
2.3.99 and I'll let you know.
Ciao,
Stefano
P.S.: That's funny, for two italians, to communicate in a foreign language,
isn't it?:-)
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
