"Cyrille Chepelov (home)" wrote:
>
> On Tue, 16 May 2000, Cyrille Chepelov (home) wrote:
>
> > > > I'm going to experiment further, by doing things like calling
> > > > pegasus_reset_mac and pegasus_start_net in kpegasusd, but before I do
> > > > that, I wanted to know whether someone has better ideas...
> > > I don't think this will work, but who knows... Anyway, i am curious
> > > to hear about the results.
> > Will report about that tomorrow.
>
> didn't work.
I told you so ;-(
> I activated the pegasus_irq routine ; this gives strange results.
> The eight bytes indeed contain the data I expected (in particular, txst0
> and txst1, whith "probably good" values. When the adapter locks itself, it
> returns a carrier loss (txst0 == 0x18).
Which is not right if course, the problem might be no response to the
NAKs.
> However, unlike what the manual says, those eight bytes and the counter in
> particular are *not* reset upon EP3 access.
That's one of the reasons i don't use interrupt pipe for now. It behaves
weird!
best,
Petkan
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
