At 03:49 am 18/05/00, Johannes Erdfelt wrote:
> > May 17 09:45:12 jerry kernel: ov511: [ov511_move_data:1348] data error:
> [3] len=521, status=-63
> > May 17 09:45:12 jerry kernel: ov511: [ov511_move_data:1348] data error:
> [2] len=202, status=-63
>
>This is where the problem is.
>
>-63 = -ENOSR = TD_CTRL_DBUFERR is set
>
>All of that means "Data Buffer Error". In this case, there was an
>overrun writing data to system memory. I've never actually seen this
>error generated before.
I reported this error several weeks ago. It occurs in many versions of ov511.
>This sounds like a hardware problem. Could you give us a description of
>your hardware?
>
>Is this machine typically busy?
My camera is a LifeView RoboCam and the error occurs on both UHCI drivers
on a variety of machines and on OHCI on an Athlon.
HOWEVER, when I upgraded to 2.3.99-pre9-2 the data error messages stopped !!!!
I still get those other messages on start up and there is a colour problem
when capturing stills at 320x200 in xawtv (stills at full screen are OK!!)
Otherwise I am very happy with this driver.
==================================================================
You're only jealous because the little penguins are talking to me.
==================================================================
Bill Maidment
Elgas Ltd
Milsons Point
email: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
