At 10:48 am 18/05/00, Mark McClelland wrote:
> > May 17 09:45:12 jerry kernel: ov511: [ov511_move_data:1348] data error:
> [3] len=201, status=-63
> > May 17 09:45:12 jerry kernel: ov511: [ov511_move_data:1348] data error:
> [7] len=393, status=-63
> > May 17 09:45:12 jerry kernel: ov511: [ov511_move_data:1348] data error:
> [8] len=652, status=-63
>
><SNIP>
>This is an error that I have not seen before. I have seen similar errors
>when unplugging the camera during capture but they only happen once or
>twice and then stop. The randomness of the packet lengths makes me
>suspect that there is a hardware problem somewhere, such as a pin that
>is not making good contact. I don't know enough about USB's failure
>modes to say for sure though.
Mark
I had this problem using a LifeView RoboCam right up to 2.3.99-pre8
In 2.3.99-pre9-2 it stopped happening, so I assume there was something
hogging CPU and/or USB bus that was fixed in pre9-2.
==================================================================
You're only jealous because the little penguins are talking to me.
==================================================================
Bill Maidment
Elgas Ltd
Milsons Point
email: [EMAIL PROTECTED]
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
