-----BEGIN PGP SIGNED MESSAGE-----
Hi again, I checked it out, loading and unloading the usbmodules, and
finally it works when I modprobe usbmouse and mousedev.
So I put these lines in the boot.local skript, and it works, but I don't
think this was the way it was meant?
I mean - I presume normaly there is a dedicated script responsible for
loading the matching usb modules, and my solution works but normaly it was
not meant that way.
So where do these lines belong?
Thanks a lot
Christopher
On Mon, 22 May 2000, Dunlap, Randy wrote:
> Hi,
>
> You need a few more modules loaded (unless you have
> them built into the kernel).
> For mouse support all done as modules you need:
>
> usbcore.o
> usb-uhci.o or uhci.o or usb-ohci.o
> input.o
> usbmouse.o xor hid.o (not both)
> mousedev.o
>
> ~Randy
> ___________________________________________________
>
> > -----Original Message-----
> > From: Christopher Intemann [mailto:[EMAIL PROTECTED]]
> > Sent: Monday, May 22, 2000 8:41 AM
> > To: [EMAIL PROTECTED]
> > Subject: [linux-usb] usb mouse does not work
> >
> >
> > Hi
> > Can anybody help me?
> > I'm trying to install my logitech usb mouse on my suse6.4 system, and
> > this is what /proc/bus/usb/devices says:
> > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
> > B: Alloc= 17/900 us ( 2%), #Int= 1, #Iso= 0
> > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=0000 ProdID=0000 Rev= 0.00
> > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
> > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
> > T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
> > D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
> > P: Vendor=046d ProdID=c002 Rev= 1.20
> > S: Manufacturer=Logitech
> > S: Product=USB-PS/2 Mouse M-BA47
> > C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 50mA
> > I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02
> > Driver=usb_mouse
> > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms
> >
> > So I would say the mouse is there...
> > But where?
> > This is lsmod(the interesting part):
> >
> > usbmouse 1028 0 (unused)
> > input 1792 1 [usbmouse]
> > usb-uhci 17336 0 (unused)
> >
> > Mhh, I don't know why the mouse doesn't use the usbmouse modul.
> > Finally cat /dev/usbmousexxx shows definetly 'no such device'
> > no difference if I try the 10, 32 or the 13, 32 device(I
> > don't know wich
> > one would be right, maybe anybody know, it's the original suse 6.4
> > 2.2.14 Kernel with usb, sensors etc. extension.)
> > It would be great if anybody could tell me what I would have to do to
> > make my mouse work, in particular it is the Logitech mouseman wheel,
> > full version(not oem etc.)
> > Thanks a lot
> > Christopher
>
PGP-Public-Key: http://www.math.uni-goettingen.de/intemann/pgp.asc
-----BEGIN PGP SIGNATURE-----
Version: 2.6.3i
Charset: noconv
iQCVAwUBOSmIH7L3QQTEbD3VAQGLHwQAsL3pkCPRqyOK28Lg8fxCqUnpIo5wOfm+
z+Pyg4FxtLkAJXvoLueBAgP8YVHwClE6PvA85BcsvHtAuh++KvmgN2aO01SpBke7
AJTYAoec39Vh/3ofNiIVTZ1Evy6eLQPYIHr4dqpzIJtNd4pT0IXgrt4ItdlbFShp
WLL3+llPQF0=
=aKoX
-----END PGP SIGNATURE-----
---------------------------------------------------------------------
To unsubscribe, e-mail: [EMAIL PROTECTED]
For additional commands, e-mail: [EMAIL PROTECTED]
