This patch updates the common USB code touching the USB private
registers with the specific bits to properly enable OHCI and EHCI
controllers on BCM63xx SoCs. As a result we now need to protect access
to Read Modify Write sequences using a spinlock because we cannot
guarantee that any of the exposed helper will not be called
concurrently.
Signed-off-by: Maxime Bizon <mbi...@freebox.fr>
Signed-off-by: Florian Fainelli <flor...@openwrt.org>
---
arch/mips/bcm63xx/usb-common.c | 97 ++++++++++++++++++++
.../include/asm/mach-bcm63xx/bcm63xx_usb_priv.h | 2 +
2 files changed, 99 insertions(+)
diff --git a/arch/mips/bcm63xx/usb-common.c b/arch/mips/bcm63xx/usb-common.c
index b617cf6..e18ac08 100644
--- a/arch/mips/bcm63xx/usb-common.c
+++ b/arch/mips/bcm63xx/usb-common.c
@@ -5,10 +5,12 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
+ * Copyright (C) 2008 Maxime Bizon <mbi...@freebox.fr>
* Copyright (C) 2012 Kevin Cernekee <cerne...@gmail.com>
* Copyright (C) 2012 Broadcom Corporation
*
*/
+#include <linux/spinlock.h>
#include <linux/export.h>
#include <bcm63xx_cpu.h>
@@ -16,9 +18,14 @@
#include <bcm63xx_io.h>
#include <bcm63xx_usb_priv.h>
+static DEFINE_SPINLOCK(usb_priv_reg_lock);
+
void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device)
{
u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&usb_priv_reg_lock, flags);
val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
if (is_device) {
@@ -36,12 +43,17 @@ void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool
is_device)
else
val &= ~USBH_PRIV_SWAP_USBD_MASK;
bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_SWAP_6368_REG);
+
+ spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
}
EXPORT_SYMBOL(bcm63xx_usb_host_priv_cfg_set);
void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
{
u32 val;
+ unsigned long flags;
+
+ spin_lock_irqsave(&usb_priv_reg_lock, flags);
val = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_UTMI_CTL_6368_REG);
if (is_on)
@@ -49,5 +61,90 @@ void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on)
else
val |= (portmask << USBH_PRIV_UTMI_CTL_NODRIV_SHIFT);
bcm_rset_writel(RSET_USBH_PRIV, val, USBH_PRIV_UTMI_CTL_6368_REG);
+
+ spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
}
EXPORT_SYMBOL(bcm63xx_usb_priv_select_pullup);
+
+/* The following array represents the meaning of the DESC/DATA
+ * endian swapping with respect to the CPU configured endianness
+ *
+ * DATA ENDN mmio descriptor
+ * 0 0 BE invalid
+ * 0 1 BE LE
+ * 1 0 BE BE
+ * 1 1 BE invalid
+ *
+ * Since BCM63XX SoCs are configured to be in big-endian mode
+ * we want configuration at line 3.
+ */
+void bcm63xx_usb_priv_ohci_cfg_set(void)
+{
+ u32 reg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&usb_priv_reg_lock, flags);
+
+ if (BCMCPU_IS_6348())
+ bcm_rset_writel(RSET_OHCI_PRIV, 0, OHCI_PRIV_REG);
+ else if (BCMCPU_IS_6358()) {
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
+ /*
+ * The magic value comes for the original vendor BSP
+ * and is needed for USB to work. Datasheet does not
+ * help, so the magic value is used as-is.
+ */
+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
+ USBH_PRIV_TEST_6358_REG);
+
+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+ reg &= ~USBH_PRIV_SWAP_OHCI_ENDN_MASK;
+ reg |= USBH_PRIV_SWAP_OHCI_DATA_MASK;
+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
+
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+ reg |= USBH_PRIV_SETUP_IOC_MASK;
+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
+ }
+
+ spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+}
+
+void bcm63xx_usb_priv_ehci_cfg_set(void)
+{
+ u32 reg;
+ unsigned long flags;
+
+ spin_lock_irqsave(&usb_priv_reg_lock, flags);
+
+ if (BCMCPU_IS_6358()) {
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6358_REG);
+ reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
+ reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6358_REG);
+
+ /*
+ * The magic value comes for the original vendor BSP
+ * and is needed for USB to work. Datasheet does not
+ * help, so the magic value is used as-is.
+ */
+ bcm_rset_writel(RSET_USBH_PRIV, 0x1c0020,
+ USBH_PRIV_TEST_6358_REG);
+
+ } else if (BCMCPU_IS_6328() || BCMCPU_IS_6368()) {
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SWAP_6368_REG);
+ reg &= ~USBH_PRIV_SWAP_EHCI_ENDN_MASK;
+ reg |= USBH_PRIV_SWAP_EHCI_DATA_MASK;
+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SWAP_6368_REG);
+
+ reg = bcm_rset_readl(RSET_USBH_PRIV, USBH_PRIV_SETUP_6368_REG);
+ reg |= USBH_PRIV_SETUP_IOC_MASK;
+ bcm_rset_writel(RSET_USBH_PRIV, reg, USBH_PRIV_SETUP_6368_REG);
+ }
+
+ spin_unlock_irqrestore(&usb_priv_reg_lock, flags);
+}
diff --git a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
index f0d4b59..e7c01e4 100644
--- a/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
+++ b/arch/mips/include/asm/mach-bcm63xx/bcm63xx_usb_priv.h
@@ -5,5 +5,7 @@
void bcm63xx_usb_priv_select_phy_mode(u32 portmask, bool is_device);
void bcm63xx_usb_priv_select_pullup(u32 portmask, bool is_on);
+void bcm63xx_usb_priv_ohci_cfg_set(void);
+void bcm63xx_usb_priv_ehci_cfg_set(void);
#endif /* BCM63XX_USB_PRIV_H_ */
--
1.7.10.4
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
