This patch adds an ignore_oc flag which can be set by EHCI controller
not supporting or wanting to disable overcurrent checking. The EHCI
platform data in include/linux/usb/ehci_pdriver.h is also augmented to
take advantage of this new flag.

Signed-off-by: Florian Fainelli <flor...@openwrt.org>
---
 drivers/usb/host/ehci-hcd.c      |    2 +-
 drivers/usb/host/ehci-hub.c      |    4 ++--
 drivers/usb/host/ehci.h          |    1 +
 include/linux/usb/ehci_pdriver.h |    1 +
 4 files changed, 5 insertions(+), 3 deletions(-)

diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index c97503b..bd435ac 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -634,7 +634,7 @@ static int ehci_run (struct usb_hcd *hcd)
                "USB %x.%x started, EHCI %x.%02x%s\n",
                ((ehci->sbrn & 0xf0)>>4), (ehci->sbrn & 0x0f),
                temp >> 8, temp & 0xff,
-               ignore_oc ? ", overcurrent ignored" : "");
+               (ignore_oc || ehci->ignore_oc) ? ", overcurrent ignored" : "");
 
        ehci_writel(ehci, INTR_MASK,
                    &ehci->regs->intr_enable); /* Turn On Interrupts */
diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c
index 4ccb97c..c18d4e4 100644
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
@@ -611,7 +611,7 @@ ehci_hub_status_data (struct usb_hcd *hcd, char *buf)
         * always set, seem to clear PORT_OCC and PORT_CSC when writing to
         * PORT_POWER; that's surprising, but maybe within-spec.
         */
-       if (!ignore_oc)
+       if (!ignore_oc && !ehci->ignore_oc)
                mask = PORT_CSC | PORT_PEC | PORT_OCC;
        else
                mask = PORT_CSC | PORT_PEC;
@@ -825,7 +825,7 @@ static int ehci_hub_control (
                if (temp & PORT_PEC)
                        status |= USB_PORT_STAT_C_ENABLE << 16;
 
-               if ((temp & PORT_OCC) && !ignore_oc){
+               if ((temp & PORT_OCC) && (!ignore_oc && !ehci->ignore_oc)){
                        status |= USB_PORT_STAT_C_OVERCURRENT << 16;
 
                        /*
diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h
index 9dadc71..2136479 100644
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
@@ -196,6 +196,7 @@ struct ehci_hcd {                   /* one per controller */
        unsigned                use_dummy_qh:1; /* AMD Frame List table quirk*/
        unsigned                has_synopsys_hc_bug:1; /* Synopsys HC */
        unsigned                frame_index_bug:1; /* MosChip (AKA NetMos) */
+       unsigned                ignore_oc:1;
 
        /* required for usb32 quirk */
        #define OHCI_CTRL_HCFS          (3 << 6)
diff --git a/include/linux/usb/ehci_pdriver.h b/include/linux/usb/ehci_pdriver.h
index 99238b0..e2a77d3 100644
--- a/include/linux/usb/ehci_pdriver.h
+++ b/include/linux/usb/ehci_pdriver.h
@@ -42,6 +42,7 @@ struct usb_ehci_pdata {
        unsigned        big_endian_desc:1;
        unsigned        big_endian_mmio:1;
        unsigned        no_io_watchdog:1;
+       unsigned        ignore_oc:1;
 
        /* Turn on all power and clocks */
        int (*power_on)(struct platform_device *pdev);
-- 
1.7.10.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to