Dear All,
We are working on omap4470 based device,kernel-3.0.31 is running on this.
In our device modem is connected to OMAP4470 using USB EHCI.
In our current kernel code, clocks are enabled when ports get connected
and disabled during disconnect.Due to this current consumption is more in
idle use case.
I have tried to put the host in smart idle/standby mode,due to erratas around
Host doesn't allow us
use smart idle/standby capabilities.
1) i571: USB host EHCI may stall when entering smart-standby mode
2) i660: USBHOST Configured In Smart-Idle Can Lead To a Deadlock
we are thinking to implement USB EHCI runtime suspend/resume feature.
In kernel-3.0.31 architecture the usbcore driver is parent of ehci and ohci
drivers.
The ehci and ohci drivers call the pm_runtime_get_sync and
pm_runtime_put_sync of parent device usbhs core.
From the ehci-omap driver what i can see only partial implementation of
runtime PM.
what i mean is that runtime PM methods are used only during the normal
suspend path
and when nothing is connected to ports(modem disconnected in our case).
I am thinking to change the ehci driver code, could claver enough to use
runtime PM
to disable the hardware when modem is connected and the system is in idle
state.
Kindly guide me how can i go about this.
Let me know if you need further clarification from me on this.
Thanks for spending your valuable time .......:)
Cheers
Bharath
SASKEN BUSINESS DISCLAIMER: This message may contain confidential, proprietary
or legally privileged information. In case you are not the original intended
Recipient of the message, you must not, directly or indirectly, use, disclose,
distribute, print, or copy any part of this message and you are requested to
delete it and inform the sender. Any views expressed in this message are those
of the individual sender unless otherwise stated. Nothing contained in this
message shall be construed as an offer or acceptance of any offer by Sasken
Communication Technologies Limited ("Sasken") unless sent with that express
intent and with due authority of Sasken. Sasken has taken enough precautions to
prevent the spread of viruses. However the company accepts no liability for any
damage caused by any virus transmitted by this email.
Read Disclaimer at http://www.sasken.com/extras/mail_disclaimer.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
