Hi!
> > > No, I'll not polish patch for hardware I don't have and have little
> > > interest in. wanted to help you, but according to your first reply,
> > > you do not really want help.
> >
> > that's your call. Now how about you stop being such a baby and go fix
> > your mistakes to start with ? Just because I'm the maintainer of the
> > gadget framework, doesn't mean I'm the maintainer of s3c-hsotc.c file.
> > Maintainer != author too, btw.
> >
> > Anyway, I got much better stuff to do than babysitting grown ups.
>
> ..even if it could have been communicated in a gentler way.
>
> Anyway s3c-hsotg.c is a driver for our hardware so I'm going to pick this
> patch up, polish it and then re-submit it later. Thanks.
Here's version that should compile. Thanks,
Pavel
Signed-off-by: Pavel Machek <pa...@ucw.cz>
diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c
index d69b36a..c8cdde0 100644
--- a/drivers/usb/gadget/s3c-hsotg.c
+++ b/drivers/usb/gadget/s3c-hsotg.c
@@ -2092,12 +2092,14 @@ static void kill_all_requests(struct s3c_hsotg *hsotg,
}
#define call_gadget(_hs, _entry) \
+do { \
if ((_hs)->gadget.speed != USB_SPEED_UNKNOWN && \
(_hs)->driver && (_hs)->driver->_entry) { \
spin_unlock(&_hs->lock); \
(_hs)->driver->_entry(&(_hs)->gadget); \
spin_lock(&_hs->lock); \
- }
+ } \
+} while (0)
/**
* s3c_hsotg_disconnect - disconnect service
@@ -3205,7 +3207,7 @@ static int state_show(struct seq_file *seq, void *v)
readl(regs + GNPTXSTS),
readl(regs + GRXSTSR));
- seq_printf(seq, "\nEndpoint status:\n");
+ seq_puts(seq, "\nEndpoint status:\n");
for (idx = 0; idx < 15; idx++) {
u32 in, out;
@@ -3222,7 +3224,7 @@ static int state_show(struct seq_file *seq, void *v)
seq_printf(seq, ", DIEPTSIZ=0x%08x, DOEPTSIZ=0x%08x",
in, out);
- seq_printf(seq, "\n");
+ seq_puts(seq, "\n");
}
return 0;
@@ -3256,7 +3258,7 @@ static int fifo_show(struct seq_file *seq, void *v)
u32 val;
int idx;
- seq_printf(seq, "Non-periodic FIFOs:\n");
+ seq_puts(seq, "Non-periodic FIFOs:\n");
seq_printf(seq, "RXFIFO: Size %d\n", readl(regs + GRXFSIZ));
val = readl(regs + GNPTXFSIZ);
@@ -3264,7 +3266,7 @@ static int fifo_show(struct seq_file *seq, void *v)
val >> GNPTXFSIZ_NPTxFDep_SHIFT,
val & GNPTXFSIZ_NPTxFStAddr_MASK);
- seq_printf(seq, "\nPeriodic TXFIFOs:\n");
+ seq_puts(seq, "\nPeriodic TXFIFOs:\n");
for (idx = 1; idx <= 15; idx++) {
val = readl(regs + DPTXFSIZn(idx));
@@ -3335,7 +3337,7 @@ static int ep_show(struct seq_file *seq, void *v)
readl(regs + DIEPTSIZ(index)),
readl(regs + DOEPTSIZ(index)));
- seq_printf(seq, "\n");
+ seq_puts(seq, "\n");
seq_printf(seq, "mps %d\n", ep->ep.maxpacket);
seq_printf(seq, "total_data=%ld\n", ep->total_data);
@@ -3346,7 +3348,7 @@ static int ep_show(struct seq_file *seq, void *v)
list_for_each_entry(req, &ep->queue, queue) {
if (--show_limit < 0) {
- seq_printf(seq, "not showing more requests...\n");
+ seq_puts(seq, "not showing more requests...\n");
break;
}
--
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures)
http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
