On Sun, Sep 29, 2013 at 11:32 AM, Christoph Fritz <chf.fr...@googlemail.com> wrote: >> Le 26/09/2013 17:59, Christoph Fritz a écrit : >> > Their software fix: >> > "As first attemp at fixing this issue, one may try to switch LINK to >> > ULPI mode before configuring MUX and pads for USB operation. Fear is >> > that this could cause unexpected transfer from PHY to LINK, somehow >> > preventing proper initialization" >> > >> > I'll try that here with the smsc3340-phy. > > What a mess, it is also important in what order the muxing of USB-Pins > is done beside the fact that some USBOTG pins had a GPIO_OUT configured > wrongly. Don't ask how I hit this, but with that and the info from above > finally both smsc3340 phys on OTG and USBH2 get detected: pure
Can you show a patch or code so that others could fix this problem as well? Regards, Fabio Estevam -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
