Hi Marek, Peter, On Sat, Aug 25, 2012 at 01:51:38AM +0200, Marek Vasut wrote: > Add the pinmux settings for USB PHY overcurrent pins. > > Signed-off-by: Marek Vasut <[email protected]> > Cc: Chris Ball <[email protected]> > Cc: Fabio Estevam <[email protected]> > Cc: Mark Brown <[email protected]> > Cc: Shawn Guo <[email protected]> > --- > arch/arm/boot/dts/imx28.dtsi | 30 ++++++++++++++++++++++++++++++ > 1 file changed, 30 insertions(+) > > V2: This is pulled from the M28EVK and SPS1 board files, put it into common > file. > > diff --git a/arch/arm/boot/dts/imx28.dtsi b/arch/arm/boot/dts/imx28.dtsi > index b996c2d..3cba62d 100644 > --- a/arch/arm/boot/dts/imx28.dtsi > +++ b/arch/arm/boot/dts/imx28.dtsi > @@ -520,6 +520,36 @@ > fsl,voltage = <1>; > fsl,pull-up = <1>; > }; > + > + usbphy0_pins_a: usbphy0@0 { > + reg = <0>; > + fsl,pinmux-ids = < > + 0x2152 /* > MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */ > + >; > + fsl,drive-strength = <2>; > + fsl,voltage = <1>; > + fsl,pull-up = <0>; > + }; > + > + usbphy0_pins_b: usbphy0@1 { > + reg = <0>; > + fsl,pinmux-ids = < > + 0x3061 /* > MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */ > + >; > + fsl,drive-strength = <2>; > + fsl,voltage = <1>; > + fsl,pull-up = <0>; > + }; > + > + usbphy1_pins_a: usbphy1@0 { > + reg = <0>; > + fsl,pinmux-ids = < > + 0x2142 /* > MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */ > + >; > + fsl,drive-strength = <2>; > + fsl,voltage = <1>; > + fsl,pull-up = <0>; > + }; > }; > > digctl@8001c000 { > -- > 1.7.10.4
@Marek: Did you test the overcurrent functionality with the MX28 and this pinmux? I currently can not trigger any overcurrent events and also don't see changes in the PORTSC register after pulling the OC pin to 3V3. Thanks, Michael -- Pengutronix e.K. | | Industrial Linux Solutions | http://www.pengutronix.de/ | Peiner Str. 6-8, 31137 Hildesheim, Germany | Phone: +49-5121-206917-0 | Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 | -- To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
