> >
> > diff --git a/arch/arm/boot/dts/imx28.dtsi
> b/arch/arm/boot/dts/imx28.dtsi
> > index b996c2d..3cba62d 100644
> > --- a/arch/arm/boot/dts/imx28.dtsi
> > +++ b/arch/arm/boot/dts/imx28.dtsi
> > @@ -520,6 +520,36 @@
> > fsl,voltage = <1>;
> > fsl,pull-up = <1>;
> > };
> > +
> > + usbphy0_pins_a: usbphy0@0 {
> > + reg = <0>;
> > + fsl,pinmux-ids = <
> > + 0x2152 /*
> MX28_PAD_SSP2_SS2__USB0_OVERCURRENT */
> > + >;
> > + fsl,drive-strength = <2>;
> > + fsl,voltage = <1>;
> > + fsl,pull-up = <0>;
> > + };
> > +
> > + usbphy0_pins_b: usbphy0@1 {
> > + reg = <0>;
> > + fsl,pinmux-ids = <
> > + 0x3061 /*
> MX28_PAD_AUART1_CTS__USB0_OVERCURRENT */
> > + >;
> > + fsl,drive-strength = <2>;
> > + fsl,voltage = <1>;
> > + fsl,pull-up = <0>;
> > + };
> > +
> > + usbphy1_pins_a: usbphy1@0 {
> > + reg = <0>;
> > + fsl,pinmux-ids = <
> > + 0x2142 /*
> MX28_PAD_SSP2_SS1__USB1_OVERCURRENT */
> > + >;
> > + fsl,drive-strength = <2>;
> > + fsl,voltage = <1>;
> > + fsl,pull-up = <0>;
> > + };
> > };
> >
> > digctl@8001c000 {
> > --
> > 1.7.10.4
>
>
> @Marek: Did you test the overcurrent functionality with the MX28 and this
> pinmux?
>
> I currently can not trigger any overcurrent events and also don't
> see changes in the PORTSC register after pulling the OC pin to 3V3.
>
I haven't checked pinmux detail, have you enabled oc and
set oc's polarity (HW_DIGCTL_CTRL - 8001_C000h)?
Peter
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
