Hi,
* Tony Lindgren <[email protected]> [161021 00:18]:
> * Ladislav Michl <[email protected]> [161020 12:37]:
> > [ 186.457519] musb-hdrc musb-hdrc.0.auto: VBUS_ERROR in a_wait_bcon (90,
> > <VBusValid), retry #3, port1 0008010c
> >
> > And that's the end, since now it does not react on hub plug/unplug.
> >
> > Also all that VBUS_ERROR conditions are strange as hub is powered separately
> > and power lines from phy are not used.
>
> Hmm yeah. I'd like to be able to reproduce this. Can you email me
> your .config (again)? You have things in host mode with a powered
> hub plus few devices with no USB gadgets configured?
Well I found your earlier .config so presumably that did not change.
Below patch seems to do the trick for me, but I need to test more.
Care to test if it helps for you? Please test with v4.9-rc2 and the
following two fixes heading in Greg's usb-linus branch:
cacaaf80c3a6 ("usb: musb: Call pm_runtime from musb_gadget_queue")
d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order error")
I'll send a proper patch if that works for you.
Regards,
Tony
8< ------------------------
diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c
--- a/drivers/phy/phy-twl4030-usb.c
+++ b/drivers/phy/phy-twl4030-usb.c
@@ -459,8 +459,6 @@ static int twl4030_phy_power_off(struct phy *phy)
struct twl4030_usb *twl = phy_get_drvdata(phy);
dev_dbg(twl->dev, "%s\n", __func__);
- pm_runtime_mark_last_busy(twl->dev);
- pm_runtime_put_autosuspend(twl->dev);
return 0;
}
@@ -472,6 +470,8 @@ static int twl4030_phy_power_on(struct phy *phy)
dev_dbg(twl->dev, "%s\n", __func__);
pm_runtime_get_sync(twl->dev);
schedule_delayed_work(&twl->id_workaround_work, HZ);
+ pm_runtime_mark_last_busy(twl->dev);
+ pm_runtime_put_autosuspend(twl->dev);
return 0;
}
--
2.9.3
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
