On Thu, Nov 03, 2016 at 03:55:32PM -0700, Tony Lindgren wrote:
> * Tony Lindgren <[email protected]> [161103 13:59]:
> > * Ladislav Michl <[email protected]> [161101 14:14]:
> > > > cacaaf80c3a6 ("usb: musb: Call pm_runtime from musb_gadget_queue")
> > > > d8e5f0eca1e8 ("usb: musb: Fix hardirq-safe hardirq-unsafe lock order
> > > > error")
> > >
> > > tested with v4.9-rc3 which have these included.
> >
> > OK thanks.
>
> So here's something to test, v4.9-rc3 + the PHY patch I
> posted + the patch below.
>
> > Hmm yeah playing with a hub connected devices don't always enumerate.
> > When that happens, I get this:
> >
> > usb 1-1: reset high-speed USB device number 45 using musb-hdrc
> > usb 1-1: reset high-speed USB device number 45 using musb-hdrc
> > usb 1-1: reset high-speed USB device number 45 using musb-hdrc
> > usb 1-1: USB disconnect, device number 45
> > usb 1-1: new high-speed USB device number 47 using musb-hdrc
> > usb 1-1: new high-speed USB device number 48 using musb-hdrc
> > ...
> >
> > And that keeps on going until I reconnect the hub.
>
> The patch below seems to work with PM for me, except I
> the dsps glue layer won't go to idle after disconnecting
> the hub. On 2430 glue layer things idle for me properly
> and I don't seem to get any more vbus errors.
Well, at least musb reacts on hub disconnects now. Devices
get enumerated, but do not work. Also musb does notice
only hub connect/disconnect, but does not react on
disconnection of devices in hub.
Best regards,
ladis
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
