Remove the special SA1111 MMIO accessors from the ohci-sa1111 driver
as their definition will be removed shortly.  The SA1111 accessors are
barrierless, so use the _relaxed variants.

Signed-off-by: Russell King <[email protected]>
---
 drivers/usb/host/ohci-sa1111.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/usb/host/ohci-sa1111.c b/drivers/usb/host/ohci-sa1111.c
index 82842918cb0c..8758c73215d7 100644
--- a/drivers/usb/host/ohci-sa1111.c
+++ b/drivers/usb/host/ohci-sa1111.c
@@ -42,7 +42,7 @@
 #if 0
 static void dump_hci_status(struct usb_hcd *hcd, const char *label)
 {
-       unsigned long status = sa1111_readl(hcd->regs + USB_STATUS);
+       unsigned long status = readl_relaxed(hcd->regs + USB_STATUS);
 
        printk(KERN_DEBUG "%s USB_STATUS = { %s%s%s%s%s}\n", label,
             ((status & USB_STATUS_IRQHCIRMTWKUP) ? "IRQHCIRMTWKUP " : ""),
@@ -134,7 +134,7 @@ static int sa1111_start_hc(struct sa1111_dev *dev)
         * Configure the power sense and control lines.  Place the USB
         * host controller in reset.
         */
-       sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
+       writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | 
USB_RESET_FORCEHCRESET,
                      dev->mapbase + USB_RESET);
 
        /*
@@ -144,7 +144,7 @@ static int sa1111_start_hc(struct sa1111_dev *dev)
        ret = sa1111_enable_device(dev);
        if (ret == 0) {
                udelay(11);
-               sa1111_writel(usb_rst, dev->mapbase + USB_RESET);
+               writel_relaxed(usb_rst, dev->mapbase + USB_RESET);
        }
 
        return ret;
@@ -159,8 +159,8 @@ static void sa1111_stop_hc(struct sa1111_dev *dev)
        /*
         * Put the USB host controller into reset.
         */
-       usb_rst = sa1111_readl(dev->mapbase + USB_RESET);
-       sa1111_writel(usb_rst | USB_RESET_FORCEIFRESET | USB_RESET_FORCEHCRESET,
+       usb_rst = readl_relaxed(dev->mapbase + USB_RESET);
+       writel_relaxed(usb_rst | USB_RESET_FORCEIFRESET | 
USB_RESET_FORCEHCRESET,
                      dev->mapbase + USB_RESET);
 
        /*
-- 
2.7.4

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to [email protected]
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Reply via email to