On Tue, Oct 17, 2017 at 01:39:33AM +0000, Yoshihiro Shimoda wrote:
> Hi Biju-san,
>
> IIUC, when we submitted a patch for dts[i] file,
> we don't need to submit such a patch to usb maintainers.
>
> > From: Biju Das, Sent: Monday, October 16, 2017 7:13 PM
> >
> > From: Fabrizio Castro <fabrizio.cas...@bp.renesas.com>
> >
> > Add node for xhci. Boards DT files will enable it if needed.
> >
> > Signed-off-by: Fabrizio Castro <fabrizio.cas...@bp.renesas.com>
> > ---
> > arch/arm/boot/dts/r8a7743.dtsi | 20 ++++++++++++++++++++
> > 1 file changed, 20 insertions(+)
> >
> > diff --git a/arch/arm/boot/dts/r8a7743.dtsi b/arch/arm/boot/dts/r8a7743.dtsi
> > index 699c040..386bf07 100644
> > --- a/arch/arm/boot/dts/r8a7743.dtsi
> > +++ b/arch/arm/boot/dts/r8a7743.dtsi
> > @@ -931,6 +931,26 @@
> > status = "disabled";
> > };
> >
> > + /*
> > + * pci1 and xhci share the same phy, therefore only one of them
> > + * can be active at any one time. If both of them are enabled,
> > + * a race condition will determine who'll control the phy.
> > + * A firmware file is needed by the xhci driver in order for
> > + * USB 3.0 to work properly.
> > + */
> > + xhci: usb@ee000000 {
> > + compatible = "renesas,xhci-r8a7743",
> > + "renesas,rcar-gen2-xhci";
> > + reg = <0 0xee000000 0 0xc00>;
> > + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
> > + clocks = <&cpg CPG_MOD 328>;
> > + power-domains = <&sysc R8A7743_PD_ALWAYS_ON>;
> > + resets = <&cpg 328>;
> > + phys = <&usb2 1>;
> > + phy-names = "usb";
> > + status = "disabled";
> > + };
> > +
> > sdhi0: sd@ee100000 {
> > compatible = "renesas,sdhi-r8a7743";
> > reg = <0 0xee100000 0 0x328>;
>
> It seems good to me. So,
>
> Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda...@renesas.com>
Thanks, applied.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
