go to www.ipcop.org and join the mailing list! On Wed, 14 Jan 2004 13:05:58+1300 Yuri de Groot <[EMAIL PROTECTED]> wrote:
> > Yuri - was the 0xe400 you refer to the 1st I/O figure or > > the > > > > Non-prefetchable 32 bit memory at 0xe4000000 figure? > > > > You should be using the 1st I/O number. > > I used the first I/O number out of three I/O numbers. > The Non-pref 32 thingy was some other number. > > > I guess it should work with ttyS3 - though I always use > > ttyS4 - and I create it (ttys4 exists - but not ttyS4, > > don't know if there is a difference though). I then link > > ttyS4 to /dev/modem and use /dev/modem in the set serial > > line. > > Well, the IPCop dial-up settings only let me choose: > COM1, COM2, COM3 or COM4. > Since COM1 - COM4 map to ttyS0 - ttyS3, wouldn't that mean > that ttyS4 would require COM5? > I wish IPCop dial-up settings would use *nix nomenclature > instead of DoS nomenclature to keep things simple, darn it. > I even tried disabling the built-in serial & parallel ports > to free up irqs. > I tried with p'n'p on or off in the bios - no joy either > way. > > Yuri > >
