There is a script that gets executed when a card is inserted. Based
on some rules, it determines, from the card ID, what drivers would
be needed to access the card.
I think the PCMCIA hardware has been identified. It also seems that you
have put a card in slot 1. It is a mamory card of some sort. Usually
the driver can list the manufacturer. Your calls your card 'Anonymous
memory.' It then tries to make sire the memory_cs (Memory Card Services)
driver is loaded. This fails because modprobe cannot find the needed file:
/lib/modules/2.4.10-12a/pcmcia/memory_cs.o
As root, what happens if you do this:
modprobe memory_cs
I expect it complains.
It seems you are missing the PCMCIA card services drivers. You need to check
your kernel compile. Maybe the drivers are in there but not installed.
Or your kernel module dependency file is hosed, making modprobe look in the
wrong place.
On my system, when I insert a Clik card (a hard disk type card), I
get this (so you know what it should look like):
Feb 21 08:56:39 dolphin cardmgr[1269]: initializing socket 1
Feb 21 08:56:39 dolphin cardmgr[1269]: socket 1: ATA/IDE Fixed Disk
Feb 21 08:56:39 dolphin cardmgr[1269]: executing: 'modprobe ide-cs'
Feb 21 08:56:41 dolphin kernel: hde: IOMEGA Clik! 40 CZ ATAPI, ATAPI cdrom or floppy?,
assuming FLOPPY drive
Feb 21 08:56:41 dolphin kernel: ide2 at 0x180-0x187,0x386 on irq 9
Feb 21 08:56:41 dolphin kernel: ide-floppy driver 0.97.sv
Feb 21 08:56:41 dolphin kernel: hde: 39441kB, 78882 blocks, 512 sector size
Feb 21 08:56:42 dolphin kernel: hde: hde4
Feb 21 08:56:42 dolphin kernel: ide_cs: hde: Vcc = 5.0, Vpp = 0.0
Feb 21 08:56:42 dolphin cardmgr[1269]: executing: './ide start hde'
Feb 21 08:56:42 dolphin cardmgr[1269]: exiting
On Wed, 20 Feb 2002 14:18:01 -0800 (PST)
Net Llama <[EMAIL PROTECTED]> wrote:
| Here's what appears when a card is inserted:
|
| Feb 19 13:10:15 localhost cardmgr[847]: starting, version is 3.1.31
| Feb 19 13:10:15 localhost cardmgr[847]: watching 2 sockets
| Feb 19 13:10:15 localhost cardmgr[847]: Card Services release does not
| match
| Feb 19 13:12:36 localhost cardmgr[847]: exiting
| Feb 19 13:12:52 localhost cardmgr[873]: starting, version is 3.1.31
| Feb 19 13:12:52 localhost cardmgr[873]: watching 2 sockets
| Feb 19 13:12:52 localhost cardmgr[873]: Card Services release does not
| match
| Feb 19 13:19:40 localhost cardmgr[873]: initializing socket 1
| Feb 19 13:19:40 localhost cardmgr[873]: socket 1: Anonymous Memory
| Feb 19 13:19:40 localhost cardmgr[873]: executing: 'modprobe memory_cs'
| Feb 19 13:19:40 localhost kernel: cs: memory probe
| 0x80000000-0x80ffffff: excluding 0x80000000-0x80ffffff
| Feb 19 13:19:40 localhost kernel: cs: unable to map card memory!
| Feb 19 13:19:40 localhost last message repeated 3 times
| Feb 19 13:19:41 localhost cardmgr[873]: + modprobe: Can't locate module
| memory_cs
| Feb 19 13:19:41 localhost cardmgr[873]: modprobe exited with status 255
| Feb 19 13:19:41 localhost cardmgr[873]: module
| /lib/modules/2.4.10-12a/pcmcia/memory_cs.o not
| available
| Feb 19 13:19:42 localhost cardmgr[873]: get dev info on socket 1 failed:
| Resource temporarily
| unavailable
| Feb 19 13:19:42 localhost cardmgr[873]: shutting down socket 1
| Feb 19 13:19:42 localhost cardmgr[873]: executing: 'modprobe -r
| memory_cs'
| Feb 19 13:19:42 localhost cardmgr[873]: initializing socket 1
| Feb 19 13:19:42 localhost cardmgr[873]: socket 1: Anonymous Memory
| Feb 19 13:19:42 localhost cardmgr[873]: executing: 'modprobe memory_cs'
| Feb 19 13:19:42 localhost cardmgr[873]: + modprobe: Can't locate module
| memory_cs
| Feb 19 13:19:42 localhost cardmgr[873]: modprobe exited with status 255
| Feb 19 13:19:42 localhost cardmgr[873]: module
| /lib/modules/2.4.10-12a/pcmcia/memory_cs.o not
| available
| Feb 19 13:19:44 localhost cardmgr[873]: get dev info on socket 1 failed:
| Resource temporarily
| unavailable
| Feb 19 13:20:00 localhost CROND[894]: (root) CMD ( /sbin/rmmod -as)
| Feb 19 13:22:15 localhost cardmgr[873]: shutting down socket 1
| Feb 19 13:22:15 localhost cardmgr[873]: executing: 'modprobe -r
| memory_cs'
|
| --- Roger Oberholtzer <[EMAIL PROTECTED]> wrote:
| > For the intel PCMCIA at least, you may need to specify
| > which PCMCIA hardware you have. There are a number of chipsets
| > that the PCMCIA system does not automatically identify.
| >
| > I think this is in a readme in the kernel sources, but as I
| > remember, check out /etc/sysconfig/pcmcia. One of the items
| > lets you say which type of PCMCIA interface there is. I know
| > nothing about Powerbook hardware, so I can say no more.
| >
| > What gets printed in /var/log/messages when a card is inserted?
|
| =====
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
| Lonni J. Friedman [EMAIL PROTECTED]
|
| Linux Step-by-step help: http://netllama.ipfox.com
|
| .
|
| __________________________________________________
| Do You Yahoo!?
| Yahoo! Sports - Coverage of the 2002 Olympic Games
| http://sports.yahoo.com
| _______________________________________________
| Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users
| Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
--
+============================+===============================+
| Roger Oberholtzer | E-mail: [EMAIL PROTECTED] |
| OPQ Systems AB | WWW: http://www.opq.se/ |
| Erik Dahlbergsgatan 41-43 | Phone: Int + 46 8 314223 |
| 115 32 Stockholm | Mobile: Int + 46 733 621657 |
| Sweden | Fax: Int + 46 8 302602 |
+============================+===============================+
_______________________________________________
Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users
Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
