Thanks Joel. I give those a whirl and see if I can pull it off. On Saturday 13 April 2002 10 22:53 pm, Joel Hammer's voice rose above the ones in my head and declared: > You can pass parameters at boot time, and they can, if memory serves, > be put into lilo.conf. > Here is what I have in mine. > image = /vmlinuz.works.Jan222000 > label = LinuxJan22 > root = /dev/hda3 > read-only > append = "aha152x=0x340,12,7 ether=0,0,eth1, hdc=52946,16,63" > > I don't have to supply anything but the information that I have two > NIC's. They are both PCI, but you sound like you have ISA cards. > > This is an example from a book for lilo.conf: > ether=IRQ,port,mem_start,men_end,name > ether=5, 0x280, 0xD800, 0xDFFF, eth0 > > This example didn't use the append parameter. You may have to > experiment. > > Make sure you have more than one lilo.conf entry so you can reboot > the computer if you really mess one of the lilo.conf entries. > Joel > [snips of tales o' woe]
_______________________________________________ Linux-users mailing list - http://linux-sxs.org/mailman/listinfo/linux-users Subscribe/Unsubscribe info, Archives,and Digests are located at the above URL.
