OK, I need someone more familiar w/ Red Crap to give me a clue on this
Ahhh..insult my preferred distro, and then ask for help with it, that's a good tactic. ;)
one. This is 7.3 running kernel 2.4.18-3.
Needed to replace the kernel and iptables (2.4.18 lacks htb3 support and ip_nat_h323/ip_conntrack_h323 among other things, such as xfs).
Anyway, d/l, patched, installed new kernel.
First bug: /etc/fstab looked bizarre (weirdness with LABEL=/ nonsense). Fixed it and boot proceeded fine.
Current bug: I have 3 interfaces: 3c59x, 8139too, dmfe. Under 2.4.18-3 they come up fine. Under 2.4.21-xfs dmfe causes a large number of TX reset errors. I've used these same interface cards with 2.4.21 on other systems with no problems. So there must be some kind of tomfoolery going on with interface configurations under Red Crap.
The same modules load, things look the same, except dmfe doesn't work and gives continuous errors.
What are the exact error? I'm using 8139too under 2.4.21-pre2-xfs on RH9 without any problems.
-- ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ L. Friedman [EMAIL PROTECTED] Linux Step-by-step & TyGeMo: http://netllama.ipfox.com
7:10pm up 3 days, 3:35, 1 user, load average: 0.22, 0.16, 0.10
_______________________________________________ Linux-users mailing list [EMAIL PROTECTED] Unsubscribe/Suspend/Etc -> http://www.linux-sxs.org/mailman/listinfo/linux-users
