I ran into a similar problem with my LJ4100. It appears that the APSfilter install must overwrite the filter conf file when running. I simply cleared the printcap and reran /usr/share/apsfilter/setup. Reentered the information and all was well again.
Shawn On Tue, 12 Aug 2003 22:14:28+0000 Ted Ozolins<[EMAIL PROTECTED]> professed: > On Slackware 8.1, I had printing (lpr/lprng) using a Canon BJC-210 > working nicely. I did the upgrade to 9.0 and now I can not get it to > work no matter how or what I do. I then decided to setup printing on > another machine with a clean install of Slackware 9.0 and still no joy. > If I send a jop to the printer, I get the usual prompt that its > happening but nothing appears at the printer. If I issue "lprm -a" the > print job is listed and removed (as it should) I have lp0 detected at > boot and the bjc-210 is detected so that is not the problem (parport is > loaded) I can "cp somefile /dev/lp0" and it prints, but "lpr somefile" > renders absalutely nothing. Looking at my printcap file, the line: _______________________________________________ Linux-users mailing list [EMAIL PROTECTED] Unsubscribe/Suspend/Etc -> http://www.linux-sxs.org/mailman/listinfo/linux-users
