When I first set up my home network last summer, I used that network
card, it was constantly hanging esp. on long downloads.  Replacing these
two cards in my gateway system solved the problem.  YMMV.



Jim Conner wrote:
> 
> I have @Home as well.  I didn't have any trouble setting it up as a static
> ip.  I've tried to set it up using dhcp and haven't had much luck.  Probably
> a setting is off somewhere.  I've heard of people having problems with
> Linksys cards though.  I've used D-Link DFE530TX+ and haven't had any
> problems at all.  You might want to try another nic card and see if it causes
> the same errors.
> 
> Jim
> 
> On Thursday July 05, 2001 12:23 pm, Wade Barocsi wrote:
> > Hi folks,
> >
> > I am trying to setup @Home (Comcast in Connecticut), and am having a bit of
> > difficulty
> >
> > first some basic info: suse 7.1, 3com 3cr29220 cable modem, Linksis
> > LNE100TX v4 ethernet card.  System works on win 98 (dual boot).
> >
> > local @home  doesn't use static IP's, but is reputed to change them
> > infrequently.
> >
> > dmesg has a series of
> > "bridge-eth0: lost peer"
> > "bridge-eth0: down"
> > "bridge- eth0: found peer"
> > "bridge- eth0: up"
> >
> >
> > If anyone has any idea on what's next, or info on a suse how-to, I would
> > appreciate it ,
> >
> >
> > Thanks
> > Wade
> 
> --
> 
>   3:42pm  up 22:09,  4 users,  load average: 0.28, 0.65, 0.88
> ------------------------------------------------------------------------
> Running Caldera eD2.4 - Linux - because life is too short for reboots...
> 
> _________________________________________________________
> Do You Yahoo!?
> Get your free @yahoo.com address at http://mail.yahoo.com
> 
> _______________________________________________
> http://linux.nf -- [EMAIL PROTECTED]
> Archives, Subscribe, Unsubscribe, Digest, Etc 
>->http://linux.nf/mailman/listinfo/linux-users
_______________________________________________
http://linux.nf -- [EMAIL PROTECTED]
Archives, Subscribe, Unsubscribe, Digest, Etc 
->http://linux.nf/mailman/listinfo/linux-users

Reply via email to