Thanks Auyeung. I was afraid of that. May just go with that until it
is installed and then go to my favorite OS, Linux.
Keith B.
"Auyeung at Technet" <[EMAIL PROTECTED]> wrote:
>I don't think that one can assign more than one workgroup to ME.
>You might have to change all other home boxes to the same workgroup as
>assigned by @home. But then, security issues??
>
>Cheers
>Auyeung
>
>----- Original Message -----
>From: <[EMAIL PROTECTED]>
>
>
>> Hello All,
>>
>> I know this is a windoze question, but the expertise of this group is why
>I use
>> Linux in the first place.
>>
>> My question, as I got no help from the windoze literature, is how do I set
>up
>> more than one workgroup under windoze ME? Then I want to route from the
>> BNC card to the RJ45 card, which will be my gateway. It will have a
>dynamic
>> IP address from the ISP provider, Comcast@home.
>>
>> Overview of current setup:
>>
>> HOMENET - workgroup
>> mixed Linux/windoze boxes
>> Dual boot box has windoze ME with
>> BNC NIC ethernet card on 192.168.1.x homenet
>> RJ45 NIC ethernet card on as yet to
>determine IP address
>> have set it to 192.168.1.x for the
>time being
>> All other boxes only have one NIC card all set in the
>192.168.1.x
>> range and are using BNC type connectors
>>
>>
>> I know, I need to get with the times, but this house is rented and BNC was
>able
>> to be setup using existing holes the owner drilled for his speaker
>wires...go figure.
>>
>> Any and all help/thoughts/suggestions would be appreciated.
>>
>>
>> Regards,
>>
>> Keith B.
>
>
>_______________________________________________
>http://linux.nf -- [EMAIL PROTECTED]
>Archives, Subscribe, Unsubscribe, Digest, Etc
>->http://linux.nf/mailman/listinfo/linux-users
>
_______________________________________________
http://linux.nf -- [EMAIL PROTECTED]
Archives, Subscribe, Unsubscribe, Digest, Etc
->http://linux.nf/mailman/listinfo/linux-users
