In the new Suse 7.3 I cannot get my pinnacle tv card to work as there is a problem with video4linux:: As folows when I call kwintv via a terminal.
Warning: main: Can't load program-file /home/kantoine/.kwintvrc/default.ch! /dev/video: no overlay support Warning: kwintv: kv4lsetup had some trouble, trying to continue anyway. Warning: v4l1: VIDIOC_S_PICT in ::v4l1if Warning: v4l1: Video4Linux and DGA disagree about the framebuffer base Warning: v4l1: Video4Linux: 0x0, dga: 0xe0000000! Warning: v4l1: you probably want to insmod the bttv module with "vidmem=0xe00" Warning: v4l1: Video4Linux and DGA disagree about the color depth Warning: v4l1: Video4Linux: 0, DGA: 16. Warning: v4l1: Is kv4lsetup installed correctly? Warning: v4l1: Video4Linux and DGA disagree about the screen size Warning: v4l1: Video4Linux: 0x0x0, DGA: 1024x768x0! Warning: v4l1: Is kv4lsetup installed correctly? I cannot seem to find a Video4Linux file I can edit to comply, nor can I see a .config file.................... It talks about kv4lsetup but locate does not find it either. Tried reinstalling video4linux, no difference. Tried insmod bttv "vidmem=0xe00":: result.................... Using /lib/modules/2.4.10-4GB/kernel/drivers/media/video/bttv.o /lib/modules/2.4.10-4GB/kernel/drivers/media/video/bttv.o: unresolved symbol i2c_master_send_R933abeec /lib/modules/2.4.10-4GB/kernel/drivers/media/video/bttv.o: unresolved symbol i2c_bit_add_bus_R8c3bc60e /lib/modules/2.4.10-4GB/kernel/drivers/media/video/bttv.o: unresolved symbol i2c_bit_del_bus_R92b18f49 /lib/modules/2.4.10-4GB/kernel/drivers/media/video/bttv.o: unresolved symbol i2c_master_recv_R7f9cffd8 I have run out of ideas. Any suggestions ?? -- Keith Antoine aka 'skippy' 18 Arkana St, The Gap, Queensland 4061 Australia PH:61733002161 Retired Geriatric, Sometime Electronics Engineer, Knowall, Brain in storage _______________________________________________ Linux-users mailing list Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users
