On Mon, 19 Nov 2001 05:49:04 -0500 Bill Day <[EMAIL PROTECTED]> wrote:

> ICS requires clients to use its built in DHCP.  So let it assign it.
>  ICS 
> will assign of course 192.168.0.1 to the winbox and then each box as
> it 
> connect wil get the next succeeding ip address of local.  I do not
> know of 
> anyway to change ti from 192.168.0.# to another Class or tfrom
> 255.255.255.0 
> to another subnet.
> 
> My biggest suggestion.  Learn your way around the RH box fast. 
> Setup your 
> connection, firewall(pmfirewall good for ipchains type kernels) and
> DHCP.
> 
> Much more can be done with a linuxbox in control then a winbox, I
> learned the 
> hardway  8^)
> 
> HTH,
> 
> On Sunday 18 November 2001 22:31, you were heard blurting out:
> > Midnight babbled on about:
> > > I have a RH linux box connected to a Win98se box via a LAN. 
> Question is,
> > > how do I connect to the internet via the ICS on the Windows box?
> >
> > Simply configure the RH box with a static ip (might I suggest
> 192.168.1.10)
> > and then list the Win98 box as the default route. That should do
> it.
> >
> > Does your win98 box have a DHCP address, or a static one? one
> ethernet
> > card, or two?
> 

I ran this configuration for a long time (ICS) and it worked OK, but I
got tired of having to boot the Windoze machine.  So I bought a cheap
router box (Netgear) on sale at BestBuy.  The router box talks to my
cable modem, and the Windoze and Linux box use DHCP to talk to the
router.  This way you only need one NIC card in each box.

With ICS (you have two NICs in the Windoze box, right?) it's as stated
above.  Make the Windoze IP address the gateway for your Linux box,
and all will be cool.

-- 
Collins Richey
Denver Area
gentoo_rc6 xfce+sylpheed
_______________________________________________
Linux-users mailing list
Archives, Digests, etc at http://linux.nf/mailman/listinfo/linux-users

Reply via email to