>-----Original Message----- >From: Daniel Hill [mailto:[email protected]] > >I have no Idea what I'm doing but I'm going to give it a shot >what's the IP addresses and the output of route on the the two servers? >
(Sorry about slow replies - most of this mail was going to the company spam filter...now whitelisted On internal host-only server: Destination Gateway Genmask Flags Metric Ref Use Iface 203.97.9.104 * 255.255.255.248 U 1 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default * 0.0.0.0 UG 0 0 0 eth0 On the 'router' server: Destination Gateway Genmask Flags Metric Ref Use Iface 203.97.9.104 * 255.255.255.248 U 0 0 0 eth1 10.0.2.0 * 255.255.255.0 U 0 0 0 eth0 default * 10.0.2.2 UG 100 0 0 eth0 So traffic on the 203.97.9.104 network is fine, but routing from host-only server on 203.97.9.104 network to go via 'router' server out on the 10.0.2.0 network does not seem to pass through. I've looked now at iptables and ufw - have tried opening it all up to accept and forward all from everywhere (not sure I got it right however) but not having much success... Regards, Bryce. DISCLAIMER: If you have received this email in error, please notify us immediately by reply email, facsimile or collect telephone call to +64 3 9641200 and destroy the original. Please refer to full DISCLAIMER at http://www.hrnz.co.nz/eDisclaimer.htm _______________________________________________ Linux-users mailing list [email protected] http://lists.canterbury.ac.nz/mailman/listinfo/linux-users
