Hi, On 9/12/06, Martin Eschen <[EMAIL PROTECTED]> wrote: > Hello, > > I've already tried to get help on the following on the forum, but > until now no replies. Maybe that someone here can help me. > > I am trying to get a quickcam fusion running on a fedora FC5 box. > $ uname-a > Linux myhost 2.6.17-1.2174_FC5 #1 Tue Aug 8 15:30:55 EDT 2006 i686 > i686 i386 GNU/Linux > uvc-linux downloaded on 26-08-2006. > > make and make install went without errors. > > When manually modprobing uvcvideo I get: > # modprobe uvcvideo > FATAL: Error inserting uvcvideo > (/lib/modules/2.6.17-1.2174_FC5/usb/media/uvcvideo.ko): Unknown symbol > in module, or unknown parameter (see dmesg) > > Added to my dmesg output is: > > v4l2_common: no version for "struct_module" found: kernel tainted. > Linux video capture interface: v2.00 > uvcvideo: disagrees about version of symbol video_devdata > uvcvideo: Unknown symbol video_devdata > uvcvideo: disagrees about version of symbol video_unregister_device > uvcvideo: Unknown symbol video_unregister_device > uvcvideo: disagrees about version of symbol video_device_alloc > uvcvideo: Unknown symbol video_device_alloc > uvcvideo: disagrees about version of symbol video_register_device > uvcvideo: Unknown symbol video_register_device > uvcvideo: disagrees about version of symbol video_device_release > uvcvideo: Unknown symbol video_device_release > > > When I insert the usb plug of my camera I get the following output in dmesg: > > usb 5-2: new high speed USB device using ehci_hcd and address 2 > usb 5-2: configuration #1 chosen from 1 choice > uvcvideo: disagrees about version of symbol video_devdata > uvcvideo: Unknown symbol video_devdata > uvcvideo: disagrees about version of symbol video_unregister_device > uvcvideo: Unknown symbol video_unregister_device > uvcvideo: disagrees about version of symbol video_device_alloc > uvcvideo: Unknown symbol video_device_alloc > uvcvideo: disagrees about version of symbol video_register_device > uvcvideo: Unknown symbol video_register_device > uvcvideo: disagrees about version of symbol video_device_release > uvcvideo: Unknown symbol video_device_release > 2:3:1: cannot set freq 0 to ep 0x86 > 2:3:2: cannot set freq 0 to ep 0x86 > usbcore: registered new driver snd-usb-audio > > > What is going wrong here? Suffice it to say that help is much appreciated.
To use uvcvideo kernel module you need following modules to be present in kernel before. In my case see lsmod | grep uvc uvcvideo 32132 0 v4l1_compat 12164 1 uvcvideo v4l2_common 14208 1 uvcvideo videodev 9216 1 uvcvideo So check your lsmod | grep uvc output first Regards, Parag. _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
