Felix Möller schrieb: > Hi, > >> I cannot get my iSight in an early 2006 MacBook working. >> > Is there anything I could try? I am willing to compile from SVN or > provide any needed information. > > Hope to get this working ... trying uvccapture I get the following:
/uvccapture-0.4 # ./uvccapture -v Using videodevice: /dev/video0 Saving images to: snap.jpg Image size: 320x240 Taking snapshot every 0 seconds Taking images using mmap Unable to set format: 22. Init v4L2 failed !! exit fatal modprobing with trace=15 I get the following: > uvcvideo: Adding mapping Brightness to control > 00000000-0000-0000-0000-000000000101/2. > uvcvideo: Adding mapping Contrast to control > 00000000-0000-0000-0000-000000000101/3. > uvcvideo: Adding mapping Hue to control > 00000000-0000-0000-0000-000000000101/6. > uvcvideo: Adding mapping Saturation to control > 00000000-0000-0000-0000-000000000101/7. > uvcvideo: Adding mapping Sharpness to control > 00000000-0000-0000-0000-000000000101/8. > uvcvideo: Adding mapping Gamma to control > 00000000-0000-0000-0000-000000000101/9. > uvcvideo: Adding mapping Backlight Compensation to control > 00000000-0000-0000-0000-000000000101/1. > uvcvideo: Adding mapping Gain to control > 00000000-0000-0000-0000-000000000101/4. > uvcvideo: Adding mapping Power Line Frequency to control > 00000000-0000-0000-0000-000000000101/5. > uvcvideo: Adding mapping Hue, Auto to control > 00000000-0000-0000-0000-000000000101/16. > uvcvideo: Adding mapping Pan (relative) to control > 63610682-5070-49ab-b8cc-b3855e8d2256/1. > uvcvideo: Adding mapping Tilt (relative) to control > 63610682-5070-49ab-b8cc-b3855e8d2256/1. > uvcvideo: Adding mapping Pan/Tilt (reset) to control > 63610682-5070-49ab-b8cc-b3855e8d2256/2. > uvcvideo: Adding mapping Exposure, Auto to control > 00000000-0000-0000-0000-000000000001/2. > uvcvideo: Adding mapping Exposure (Absolute) to control > 00000000-0000-0000-0000-000000000001/4. > uvcvideo: Adding mapping White Balance Temperature, Auto to control > 00000000-0000-0000-0000-000000000101/11. > uvcvideo: Adding mapping White Balance Temperature to control > 00000000-0000-0000-0000-000000000101/10. > uvcvideo: Probing known UVC device 4 (05ac:8501) > uvcvideo: iSight: firmware already loaded. > uvcvideo: Found format YUV 4:2:2 (UYVY). > uvcvideo: - 640x480 (30.0 fps) > uvcvideo: - 352x288 (30.0 fps) > uvcvideo: - 320x240 (30.0 fps) > uvcvideo: Found a Status endpoint (addr 81). > uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) > uvcvideo: Added control 00000000-0000-0000-0000-000000000101/2 to device 4 > entity 2 > uvcvideo: Added control 00000000-0000-0000-0000-000000000101/7 to device 4 > entity 2 > uvcvideo: Added control 00000000-0000-0000-0000-000000000101/8 to device 4 > entity 2 > uvcvideo: Added control 00000000-0000-0000-0000-000000000101/9 to device 4 > entity 2 > uvcvideo: Scanning UVC chain: OT 3 <- PU 2 <- IT 1 > uvcvideo: Found a valid video chain (1 -> 3). > uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). > uvcvideo: UVC device initialized. > usbcore: registered new interface driver uvcvideo > USB Video Class driver (v0.1.0) I hope somebody has an idea what to try. ;) greetings Felix _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
