Hi Samir, On Thursday 29 November 2007, Samir Ibradzic wrote: > Laurent, you are just remarkable!
Thanks :-) > Camera worked, just after the patch was applied! I committed it to SVN. > I tested it using lucview, though no controls are working... That's because your phone has no video controls, so that's pretty normal. > here's dmesg; > [snip] > ... > > Why all these details in kernel messages? Just for the sake of the test? Those are debug messages. You can turn them off by setting the trace parameter back to 0. > How can i set it up to work in gstreamer? > > I have the following error in gstreamer-properties; > > gstreamer-properties-Message: Error running pipeline 'Video for Linux 2 > (v4l2)': Could not negotiate format [gstbasesrc.c(2062): > gst_base_src_start (): /pipeline0/v4l2src3: > Check your filtered caps, if any] I've never really used gstreamer, so don't know what goes wrong. Your phone supports MJPEG only while most other UVC devices support YUV as well. That might be a clue. > Thanks again for your hard work! This means one more camera can work in > Linux! Actually, there is a whole line of Sanyo (au) cellphones > available here in japan, who probably use same or very similar camera > USB interface... Best regards, Laurent Pinchart _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
