I built the latest driver from svn and installed it without a problem, but when I plug in the webcam the driver initialization fails:
[ 4108.805744] uvcvideo: Found UVC 1.00 device VF0410 Live! Cam Video IM Pro (041e:4063) [ 4108.808049] Device initialization failed: the default format and/or frame are not valid. [ 4108.808054] uvcvideo: <3>uvcvideo: Failed to initialize the device (-22). [ 4108.835866] 8:3:1: cannot get freq at ep 0x84 $ lsusb Bus 005 Device 008: ID 041e:4063 Creative Technology, Ltd Bus 005 Device 001: ID 0000:0000 Bus 003 Device 001: ID 0000:0000 Bus 002 Device 001: ID 0000:0000 Bus 001 Device 001: ID 0000:0000 Bus 004 Device 001: ID 0000:0000 I'm assuming that because it is a 4063 rather than 4056 that it's a slightly newer unit. It would be nice if Creative listed things like that on the boxes. T: Bus=05 Lev=01 Prnt=01 Port=07 Cnt=01 Dev#= 8 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=ef(unk. ) Sub=02 Prot=01 MxPS=64 #Cfgs= 1 P: Vendor=041e ProdID=4063 Rev= 1.00 S: Manufacturer=Creative Technology Ltd S: Product=VF0410 Live! Cam Video IM Pro C:* #Ifs= 4 Cfg#= 1 Atr=80 MxPwr=168mA I: If#= 0 Alt= 0 #EPs= 1 Cls=0e(unk. ) Sub=01 Prot=00 Driver=(none) E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=4ms I: If#= 1 Alt= 0 #EPs= 0 Cls=0e(unk. ) Sub=02 Prot=00 Driver=uvcvideo I: If#= 1 Alt= 1 #EPs= 1 Cls=0e(unk. ) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 128 Ivl=125us I: If#= 1 Alt= 2 #EPs= 1 Cls=0e(unk. ) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 256 Ivl=125us I: If#= 1 Alt= 3 #EPs= 1 Cls=0e(unk. ) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS= 800 Ivl=125us I: If#= 1 Alt= 4 #EPs= 1 Cls=0e(unk. ) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=1600 Ivl=125us I: If#= 1 Alt= 5 #EPs= 1 Cls=0e(unk. ) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=2400 Ivl=125us I: If#= 1 Alt= 6 #EPs= 1 Cls=0e(unk. ) Sub=02 Prot=00 Driver=uvcvideo E: Ad=81(I) Atr=05(Isoc) MxPS=3072 Ivl=125us I: If#= 2 Alt= 0 #EPs= 0 Cls=01(audio) Sub=01 Prot=00 Driver=snd-usb-audio I: If#= 3 Alt= 0 #EPs= 0 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio I: If#= 3 Alt= 1 #EPs= 1 Cls=01(audio) Sub=02 Prot=00 Driver=snd-usb-audio E: Ad=84(I) Atr=05(Isoc) MxPS= 400 Ivl=1ms Any help would be appreciated. I can test patches or modify things if you give me some hints :) George -- http://www.xmission.com/~georgeps/ http://whim.linuxsys.net http://code.google.com/p/megapkg/ http://code.google.com/p/opennexx/ _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
