Hi,... Laurent Pinchart schrieb:
> Once the uvcvideo driver is configured, new V4L2 controls will be available > to > control pan and tilt. Ok, today i got my brand new "Logitech Quickcam Sphere AF". I compiled and installed latest "uvcvideo" kernel modul and "libwebcam" and now i'm stuck with some errors: When starting ekiga or any other prog. to make a basic test, i got: kernel: uvcvideo: Failed to query (135) UVC control 2 (unit 2) : -110 (exp. 2). kernel: uvcvideo: Failed to query (130) UVC control 7 (unit 2) : -32 (exp. 2). on every command with uvcdynctrl i get always this error: [libwebcam] Unknown custom V4L2 control ID encountered: 134217728 btw: The "Pan/tilt Reset" command does only do a pan reset? Here are some info about my system: $ modinfo uvcvideo filename: /lib/modules/2.6.25.9-40.fc8/kernel/drivers/media/video/uvcvideo/uvcvideo.ko version: SVN r228 $ lsusb Bus 002 Device 002: ID 046d:0994 Logitech, Inc. $ uvcdynctrl -l [libwebcam] Unknown custom V4L2 control ID encountered: 134217728 (V4L2_CID_PRIVATE_BASE + 0) Listing available devices: video1 Hauppauge WinTV-HVR1110 DVB-T/H video0 UVC Camera (046d:0994) $ uvcdynctrl -c [libwebcam] Unknown custom V4L2 control ID encountered: 134217728 (V4L2_CID_PRIVATE_BASE + 0) Listing available controls for device video0: Raw bits per pixel Disable video processing LED1 Frequency LED1 Mode Focus Pan/tilt Reset Tilt Reset Pan Reset Tilt (relative) Pan (relative) Exposure, Auto Priority Exposure (Absolute) Exposure, Auto Backlight Compensation Sharpness White Balance Temperature Power Line Frequency Gain White Balance Temperature, Auto Saturation Contrast Brightness Any hints for me? Thx best regards Stefan -- _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
