No problem here also. There is always a big bunch of free memory... Keep asking ! Sooner or later, we'll find the culprit !! ;-)
Thanks On Wed, 24 Jun 2009 22:43:02 +0100, Paulo Assis <[email protected]> wrote : > You should also check memory usage, make sure your system is not > using swap. > > > 2009/6/24 Paulo Assis <[email protected]> > > > > > > > 2009/6/24 Saint Germain <[email protected]> > > > >> Hi again, > >> > >> I don't have compiz installed. > >> > > > > OK, I just ask because compiz is now set by default in some > > distros. I use it myself but with the vendor driver from nvidia it > > never caused me any problems. > > > > > >> > >> Using YUYV, I only got 5 FPS (compared to 20-23 FPS with MJPG) but > >> no strange flickering. > >> > > > > This is really strange and seems to indicate usb bandwidth issues > > or some similar problem, are you using any other device on the same > > usb controler ? Are you using a USB1 or USB2 port and what driver > > for the usb controler ? Also to what value did you set fps and what > > resolution are you using ? > > > > > >> > >> I've tried disabling hardware acceleration, and I only got less > >> FPS but the flickering is still here for MJPG (with YUYV I only > >> got 1-2 FPS). > >> > > > > A decrease in fps is normal in this case. > > > > > > > >> > >> Also, I've also tried with 320*240 to see if it's because of the > >> CPU, but the CPU load is below 50%. > >> > > > > CPU shouldn't be a problem unless you are recording video. > > > > > >> > >> Someone on Logitech side has also asked me to increase log trace > >> while trying to use mplayer. > >> The results are here: > >> http://forums.quickcamteam.net/showthread.php?tid=860 > >> > > > > Yes, I've read the post before, but I rather answer it on this > > list :-) > > > > > > Best regards, > > Paulo > > _______________________________________________ Linux-uvc-devel mailing list [email protected] https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
