Paulo, the miracle is happened, it's now works!
as in
mplayer tv://
also with preload lib with skype
LD_PRELOAD=/usr/lib/libv4l/v4l1compat.so skype
what means quirks=2???
did you need more logs, or now we can close this problem?
В Чтв, 24/06/2010 в 15:44 +0100, Paulo Assis пишет:
> Andrew Hi,
> Can you try setting quirks to 2:
>
> rmmod uvcvideo
> modprobe uvcvideo quirks=2 trace=65535
>
> please post also a working dmesg log (from vlc)
>
> Regards,
> Paulo
>
> 2010/6/24 Andrew V Kuzmin <freeg...@mail.ru>:
> > Hi Paulo! Requested logs in attach
> > dmesg - all from the system cold boot
> >
> >
> >
> >
> >
> > В Чтв, 24/06/2010 в 10:31 +0100, Paulo Assis пишет:
> >> Andrew Hi,
> >> you can increase the driver verbosity by setting the trace parameter:
> >> rmmod uvcvideo
> >> modprobe uvcvideo trace=65535
> >>
> >> trace level is given by grouping several flags so you can set it to
> >> something like 0xffffff and get a huge amount of information on the
> >> logs (just don't forget to reset it after you finish debugging)
> >>
> >> after this dmesg should be a lot more verbose.
> >>
> >> Some cameras require a quirks value to function properly, but you
> >> really need to check what's going on first.
> >>
> >> Best regards,
> >> Paulo
> >>
> >> 2010/6/24 Andrew V Kuzmin <freeg...@mail.ru>:
> >> > Hi, I did not fully inderstand how to seperverbose driver logs,
> >> > the key in guvcview -v only, not like -vvv in vlc.
> >> > DMESG once again
> >> >
> >> > when camera plugged in
> >> >
> >> > 46064.024031] usb 1-1: new high speed USB device using ehci_hcd and
> >> > address 7
> >> > [46064.158039] usb 1-1: configuration #1 chosen from 1 choice
> >> > [46064.158652] uvcvideo: Found UVC 1.00 device USB2.0 PC CAMERA
> >> > (18ec:3188)
> >> > [46064.158900] uvcvideo: UVC non compliance - GET_DEF(PROBE) not
> >> > supported. Enabling workaround.
> >> > [46064.159391] input: USB2.0 PC CAMERA
> >> > as /devices/pci0000:00/0000:00:1d.7/usb1/1-1/1-1:1.0/input/input10
> >> >
> >> > then when guvcview called
> >> >
> >> > [46206.284313] uvcvideo: Failed to query (130) UVC probe control : 0
> >> > (exp. 26).
> >> > [46206.287686] uvcvideo: Failed to query (130) UVC probe control : 0
> >> > (exp. 26).
> >> >
> >> >
> >> >
> >> >
> >> > kuz...@kuzmin-desktop:~$ guvcview -v
> >> > guvcview 1.4.1
> >> >
> >> > (process:13812): Gtk-WARNING **: Locale not supported by C library.
> >> > Using the fallback 'C' locale.
> >> > unexpected integer value (0) for vid_mux
> >> > Strings must be quoted
> >> > unexpected integer value (1) for snd_numsec
> >> > Strings must be quoted
> >> > unexpected integer value (160) for snd_bitrate
> >> > Strings must be quoted
> >> > unexpected integer value (2) for Pan_Step
> >> > Strings must be quoted
> >> > unexpected integer value (2) for Tilt_Step
> >> > Strings must be quoted
> >> > video_device: /dev/video0
> >> > vid_sleep: 0
> >> > cap_meth: 1
> >> > resolution: 640 x 480
> >> > windowsize: 480 x 700
> >> > vert pane: 0
> >> > spin behavior: 0
> >> > mode: mjpg
> >> > fps: 1/25
> >> > Display Fps: 0
> >> > bpp: 0
> >> > hwaccel: 1
> >> > avi_format: 0
> >> > sound: 1
> >> > sound Device: 0
> >> > sound samp rate: 0
> >> > sound Channels: 0
> >> > Sound delay: 0 nanosec
> >> > Sound Format: 80
> >> > Pan Step: 2 degrees
> >> > Tilt Step: 2 degrees
> >> > Video Filter Flags: 0
> >> > image inc: 0
> >> > profile(default):/home/kuzmin/default.gpfl
> >> > starting portaudio...
> >> > bt_audio_service_open: connect() failed: Connection refused (111)
> >> > bt_audio_service_open: connect() failed: Connection refused (111)
> >> > bt_audio_service_open: connect() failed: Connection refused (111)
> >> > bt_audio_service_open: connect() failed: Connection refused (111)
> >> > language catalog=> dir:/usr/share/locale type:(null) lang:en_EN
> >> > cat:guvcview.mo
> >> > mjpg: setting format to 1196444237
> >> > capture method = 1
> >> > video device: /dev/video0
> >> > /dev/video0 - device 1
> >> > Init. USB2.0 PC CAMERA (location: usb-0000:00:1d.7-1)
> >> > { pixelformat = 'MJPG', description = 'MJPEG' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' }
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'RGB3', description = 'RGB3' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'BGR3', description = 'BGR3' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'YU12', description = 'YU12' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'YV12', description = 'YV12' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > vid:18ec
> >> > pid:3188
> >> > driver:uvcvideo
> >> > checking format: 1196444237
> >> > VIDIOC_S_FORMAT - Unable to set format: Input/output error
> >> > Init v4L2 failed !!
> >> > Init video returned -2
> >> > trying minimum setup ...
> >> > capture method = 1
> >> > video device: /dev/video0
> >> > /dev/video0 - device 1
> >> > Init. USB2.0 PC CAMERA (location: usb-0000:00:1d.7-1)
> >> > { pixelformat = 'MJPG', description = 'MJPEG' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' }
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'RGB3', description = 'RGB3' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'BGR3', description = 'BGR3' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'YU12', description = 'YU12' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { pixelformat = 'YV12', description = 'YV12' }
> >> > { discrete: width = 640, height = 480 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > { discrete: width = 320, height = 240 }
> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> > vid:18ec
> >> > pid:3188
> >> > driver:uvcvideo
> >> > checking format: 1196444237
> >> > VIDIOC_S_FORMAT - Unable to set format: Input/output error
> >> > Init v4L2 failed !!
> >> > ERROR: Minimum Setup Failed.
> >> > Exiting...
> >> > free audio mutex
> >> > VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22)
> >> > closed v4l2 strutures
> >> > free controls - vidState
> >> > cleaned allocations - 100%
> >> > Closing portaudio ...OK
> >> > Terminated.
> >> >
> >> >
> >> >
> >> > В Срд, 23/06/2010 в 23:52 +0100, Paulo Assis пишет:
> >> >> Andrew Hi,
> >> >> By default vlc uses libv4l, just like most other software, when this
> >> >> fails it reverts to direct v4l2 access, (you probably should also
> >> >> check your libv4l version and update it if needed)
> >> >> vlc seems to be able to open a MJPG stream after a few failed
> >> >> attempts, I can't really understand why it fails with the other
> >> >> software (it returns a I/O error when trying to set the stream
> >> >> format).
> >> >> Can you increase the driver verbosity and check for error messages with
> >> >> dmesg ?
> >> >>
> >> >> Regards,
> >> >> Paulo
> >> >>
> >> >> 2010/6/23 Andrew V Kuzmin <freeg...@mail.ru>:
> >> >> > Got the latest version, but error still happened (logs below)
> >> >> > Have you seen the vlc logs?
> >> >> > It seems that cam not supported by гмс drivers - direct kernel v4l2 -
> >> >> > what does it means?
> >> >> >
> >> >> >
> >> >> > [0x8e24368] v4l2 demux debug: will try to find optimal width and
> >> >> > height.
> >> >> > libv4l2: error setting pixformat: Input/output error
> >> >> > libv4l2: error setting pixformat: Input/output error
> >> >> > libv4l2: error setting pixformat: Input/output error
> >> >> > [0x8e24368] v4l2 demux warning: Could not select any of the default
> >> >> > chromas; attempting to open as MPEG encoder card (access)
> >> >> > [0x8e24368] main demux warning: no access_demux module matching "v4l2"
> >> >> > could be loaded
> >> >> > [0x8e24368] main demux debug: TIMER module_need() : 55.611 ms - Total
> >> >> > 55.611 ms / 1 intvls (Avg 55.611 ms)
> >> >> > [0x8bdfa98] main input debug: creating access 'v4l2' path=''
> >> >> > [0x8e28398] main access debug: looking for access module: 1 candidate
> >> >> > [0x8e28398] v4l2 access debug: Trying direct kernel v4l2
> >> >> > [0x8e28398] v4l2 access debug: opening device '/dev/video0'
> >> >> >
> >> >> >
> >> >> >
> >> >> > kuz...@kuzmin-desktop:~$ guvcview --format yuyv
> >> >> > guvcview 1.4.1
> >> >> >
> >> >> > (process:4154): Gtk-WARNING **: Locale not supported by C library.
> >> >> > Using the fallback 'C' locale.
> >> >> > unexpected integer value (0) for vid_mux
> >> >> > Strings must be quoted
> >> >> > unexpected integer value (1) for snd_numsec
> >> >> > Strings must be quoted
> >> >> > unexpected integer value (160) for snd_bitrate
> >> >> > Strings must be quoted
> >> >> > unexpected integer value (2) for Pan_Step
> >> >> > Strings must be quoted
> >> >> > unexpected integer value (2) for Tilt_Step
> >> >> > Strings must be quoted
> >> >> > bt_audio_service_open: connect() failed: Connection refused (111)
> >> >> > bt_audio_service_open: connect() failed: Connection refused (111)
> >> >> > bt_audio_service_open: connect() failed: Connection refused (111)
> >> >> > bt_audio_service_open: connect() failed: Connection refused (111)
> >> >> > video device: /dev/video0
> >> >> > /dev/video0 - device 1
> >> >> > Init. USB2.0 PC CAMERA (location: usb-0000:00:1d.7-1)
> >> >> > { pixelformat = 'MJPG', description = 'MJPEG' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' }
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'RGB3', description = 'RGB3' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'BGR3', description = 'BGR3' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'YU12', description = 'YU12' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'YV12', description = 'YV12' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > vid:18ec
> >> >> > pid:3188
> >> >> > driver:uvcvideo
> >> >> > checking format: 1448695129
> >> >> > VIDIOC_S_FORMAT - Unable to set format: Input/output error
> >> >> > Init v4L2 failed !!
> >> >> > Init video returned -2
> >> >> > trying minimum setup ...
> >> >> > video device: /dev/video0
> >> >> > /dev/video0 - device 1
> >> >> > Init. USB2.0 PC CAMERA (location: usb-0000:00:1d.7-1)
> >> >> > { pixelformat = 'MJPG', description = 'MJPEG' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'YUYV', description = 'YUV 4:2:2 (YUYV)' }
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'RGB3', description = 'RGB3' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'BGR3', description = 'BGR3' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'YU12', description = 'YU12' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { pixelformat = 'YV12', description = 'YV12' }
> >> >> > { discrete: width = 640, height = 480 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > { discrete: width = 320, height = 240 }
> >> >> > Time interval between frame: 1/25, 1/20, 1/15, 1/10,
> >> >> > vid:18ec
> >> >> > pid:3188
> >> >> > driver:uvcvideo
> >> >> > checking format: 1196444237
> >> >> > VIDIOC_S_FORMAT - Unable to set format: Input/output error
> >> >> > Init v4L2 failed !!
> >> >> > ERROR: Minimum Setup Failed.
> >> >> > Exiting...
> >> >> > VIDIOC_REQBUFS - Failed to delete buffers: Invalid argument (errno 22)
> >> >> > cleaned allocations - 100%
> >> >> > Closing portaudio ...O
> >> >> >
> >> >> > В Срд, 23/06/2010 в 17:05 +0100, Paulo Assis пишет:
> >> >> >> guvcview --format yuyv
> >> >> >
> >> >> >
> >> >>
> >> >
> >> >
> >> >
> >>
> >
> >
>
_______________________________________________
Linux-uvc-devel mailing list
Linux-uvc-devel@lists.berlios.de
https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
