Hello UVC devs, I've got an HP Slate 500 that I've installed Ubuntu on. It has two web-cams: one forward facing and one rear facing. I want to report that the rear-facing camera works quite well with the UVC driver. Perhaps you may want to add it to your list of working devices. Here's some info from lsusb.
Bus 001 Device 006: ID 10f1:1a26 Importek Device Descriptor: bLength 18 bDescriptorType 1 bcdUSB 2.00 bDeviceClass 239 Miscellaneous Device bDeviceSubClass 2 ? bDeviceProtocol 1 Interface Association bMaxPacketSize0 64 idVendor 0x10f1 Importek idProduct 0x1a26 bcdDevice 2.37 iManufacturer 1 Importek iProduct 2 HP Webcam iSerial 3 Dual Sensor bNumConfigurations 1 Unfortunately, the forward-facing camera isn't working at all. There is only one /dev/video device which is the rear facing one. I'm not all that experienced in these things but it doesn't appear that the forward facing camera is listed with "lsusb" (I've identified all the devices which are). I noticed this "Dual Sensor" line from the above, so perhaps the two cameras are in fact incorporated into a single device? Could that be the case? If so, is it possible to activate the forward facing camera, or is this "too unusual" to be handled by the UVC Driver? Thanks! _______________________________________________ Linux-uvc-devel mailing list Linux-uvc-devel@lists.berlios.de https://lists.berlios.de/mailman/listinfo/linux-uvc-devel
