From: Jes Sorensen <[email protected]> Set REG_QUEUE_CTRL and REG_ACLK_MON for 8192eu.
Signed-off-by: Jes Sorensen <[email protected]> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 14 ++++++++++++++ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 1 + 2 files changed, 15 insertions(+) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index c800882..5a2eb0a 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -7197,6 +7197,20 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) if (priv->fops->init_statistics) priv->fops->init_statistics(priv); + if (priv->rtl_chip == RTL8192E) { + /* + * 0x4c6[3] 1: RTS BW = Data BW + * 0: RTS BW depends on CCA / secondary CCA result. + */ + val8 = rtl8xxxu_read8(priv, REG_QUEUE_CTRL); + val8 &= ~BIT(3); + rtl8xxxu_write8(priv, REG_QUEUE_CTRL, val8); + /* + * Reset USB mode switch setting + */ + rtl8xxxu_write8(priv, REG_ACLK_MON, 0x00); + } + rtl8723a_phy_lc_calibrate(priv); priv->fops->phy_iq_calibrate(priv); diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h index 82cbe85..c19f234 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h @@ -512,6 +512,7 @@ #define REG_PKT_VO_VI_LIFE_TIME 0x04c0 #define REG_PKT_BE_BK_LIFE_TIME 0x04c2 #define REG_STBC_SETTING 0x04c4 +#define REG_QUEUE_CTRL 0x04c6 #define REG_HT_SINGLE_AMPDU_8723B 0x04c7 #define REG_PROT_MODE_CTRL 0x04c8 #define REG_MAX_AGGR_NUM 0x04ca -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
