From: Jes Sorensen <[email protected]> The vendor driver set register 0xfe58 REG_USB_HWPWM in it's init sequence for 8192eu. Do the same here.
Signed-off-by: Jes Sorensen <[email protected]> --- drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c | 2 ++ drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h | 1 + 2 files changed, 3 insertions(+) diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c index eac2a54..e06b25e 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu.c @@ -7225,6 +7225,8 @@ static int rtl8xxxu_init_device(struct ieee80211_hw *hw) val32 |= FPGA_RF_MODE_CCK; rtl8xxxu_write32(priv, REG_FPGA0_RF_MODE, val32); } + } else if (priv->rtl_chip == RTL8192E) { + rtl8xxxu_write8(priv, REG_USB_HRPWM, 0x00); } val32 = rtl8xxxu_read32(priv, REG_FWHW_TXQ_CTRL); diff --git a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h index ade42fe..82cbe85 100644 --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_regs.h @@ -1043,6 +1043,7 @@ #define USB_HIMR_ROK BIT(0) /* Receive DMA OK Interrupt */ #define REG_USB_SPECIAL_OPTION 0xfe55 +#define REG_USB_HRPWM 0xfe58 #define REG_USB_DMA_AGG_TO 0xfe5b #define REG_USB_AGG_TO 0xfe5c #define REG_USB_AGG_TH 0xfe5d -- 2.5.5 -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to [email protected] More majordomo info at http://vger.kernel.org/majordomo-info.html
