I’ve created cleaner logs (particularly the dmesg one) and have added timestamps line-by-line to both so it should be easier to track between the two log files:
wpa_supplicant: http://termbin.com/cx0e dmesg | grep libertas: http://termbin.com/bvdj Christopher Williamson On 21 July 2016 at 22:00:02, Christopher Williamson (h...@chrisaw.com(mailto:h...@chrisaw.com)) wrote: > Sure! > > wpa_supplicant logs: > http://termbin.com/z1hg > > dmesg logs (grepped for libertas): > http://termbin.com/7rt5 > > > Christopher Williamson > > > > > On 21 July 2016 at 21:38:26, Dan Williams > (d...@redhat.com(mailto:d...@redhat.com)) wrote: > > > On Thu, 2016-07-21 at 11:55 -0700, Christopher Williamson wrote: > > > Just to confirm - I can connect to the same network using the same > > > configurations using a USB wifi adapter I tried. > > > > Can you grab simultaneous driver debug logging and supplicant debug > > logging? Unfortunately the 'status 1' is an unspecified failure, which > > could be from the AP or the firmware. > > > > Dan > > > > > > > Unfortunately it’s not ideal since the point of the Viliv N5 is that > > > it’s ultra portable so I would really like to get the inbuilt wifi > > > card working. > > > > > > It seems odd that wpa_supplicant reports the connection being > > > “rejected” as seen below: > > > > > > wlan0: CTRL-EVENT-ASSOC-REJECT bssid=a0:63:91:1e:ee:43 status_code=1 > > > > > > Most of the debug output sadly doesn’t mean a great deal to me - wifi > > > isn’t really my area of expertise. > > > > > > On 21 July 2016 at 19:10:56, Christopher Williamson > > > (h...@chrisaw.com(mailto:h...@chrisaw.com)) wrote: > > > > > > > > > > > > > > > Sure, here are the results: > > > > > > > > http://termbin.com/e8e2 > > > > > > > > Christopher Williamson > > > > > > > > > > > > On 21 July 2016 at 16:37:24, Dan Williams (d...@redhat.com(mailto:d > > > > c...@redhat.com)) wrote: > > > > > > > > > > > > > > On Wed, 2016-07-20 at 15:16 -0700, Christopher Williamson wrote: > > > > > > > > > > > > I used NetworkManager in the previous test. > > > > > > > > > > > > This time around I have used wpa_supplicant directly and get > > > > > > the > > > > > > following results: > > > > > > > > > > > > http://termbin.com/j8ea > > > > > > > > > > > > Thought I’d throw them on a pastebin since it’s over 700 lines. > > > > > Can you try with "-D nl80211" instead of using the WEXT > > > > > supplicant > > > > > driver? NM is likely going to use nl80211 since the driver has > > > > > some > > > > > support for cfg80211/nl80211 and only does WEXT through the glue > > > > > layer. > > > > > > > > > > Dan > > > > > > > > > > > > > > > > > Christopher Williamson > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > On 20 July 2016 at 22:50:34, Dan Williams > > > > > > (d...@redhat.com(mailto:d...@redhat.com)) wrote: > > > > > > > > > > > > > > > > > > > > > > > > > > > On Wed, 2016-07-20 at 13:06 -0700, Christopher Williamson > > > > > > > wrote: > > > > > > > > > > > > > > > > > > > > > > > > Hi Dan, > > > > > > > > > > > > > > > > Ah - yeah I hadn’t thought it may be a kernel build option. > > > > > > > > I’ve > > > > > > > > now > > > > > > > > built that and dmesg is a much more lively place! > > > > > > > > > > > > > > > > I’ve provided output logs for both when the device is > > > > > > > > connected > > > > > > > > and > > > > > > > > when a connection attempt is made - hopefully this is > > > > > > > > useful. > > > > > > > > > > > > > > The card is scanning and only finds 'shaunthesheep' 20 > > > > > > > seconds > > > > > > > after > > > > > > > you "connect for the first time". The logs stop 3 seconds > > > > > > > later. > > > > > > > Are > > > > > > > you connecting with wicd or something else? > > > > > > > > > > > > > > Can you run wpa_supplicant with the "-dddtu" option so we can > > > > > > > get > > > > > > > debug > > > > > > > log output from it? > > > > > > > > > > > > > > Dan > > > > > > -- > > > > > > To unsubscribe from this list: send the line "unsubscribe > > > > > > linux- > > > > > > wireless" in > > > > > > the body of a message to majord...@vger.kernel.org > > > > > > More majordomo info at http://vger.kernel.org/majordomo-info.ht > > > > > > ml > > > -- > > > To unsubscribe from this list: send the line "unsubscribe linux- > > > wireless" in > > > the body of a message to majord...@vger.kernel.org > > > More majordomo info at http://vger.kernel.org/majordomo-info.html > > -- > > To unsubscribe from this list: send the line "unsubscribe linux-wireless" in > > the body of a message to majord...@vger.kernel.org > > More majordomo info at http://vger.kernel.org/majordomo-info.html > -- To unsubscribe from this list: send the line "unsubscribe linux-wireless" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
