Is there some way to disable the bluetooth functionality?
Am 18.10.2016 um 21:06 schrieb Johannes Berg:
On Tue, 2016-10-18 at 18:22 +0200, Oliver Zemann wrote:
Because of the problems with the ath10 card, i bought an intel 7260
(mpcie) wifi card. Unfortunately it is also not working.
I get tons of those messages:
[ 175.777030] usb 1-1: new full-speed USB device number 2 using
[ 175.933953] usb 1-1: New USB device found, idVendor=8087,
[ 175.940681] usb 1-1: New USB device strings: Mfr=0, Product=0,
[ 175.966954] Bluetooth: hci0: read Intel version:
[ 175.973313] Bluetooth: hci0: Intel Bluetooth firmware file:
[ 176.183954] Bluetooth: hci0: Intel Bluetooth firmware patch
[ 176.749831] usb 1-1: USB disconnect, device number 2
This is odd. However, it's entirely related to the NICs *Bluetooth*
function, which lives on USB.
What's confusing me is that this device is connected through pcie,
not usb. When i use lspci i get:
[root@alarm log]# lspci
00:02.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev
00:03.0 PCI bridge: Marvell Technology Group Ltd. Device 6828 (rev
02:00.0 Network controller: Qualcomm Atheros QCA986x/988x 802.11ac
Wireless Network Adapter (rev ff)
So the other card is seen as pci device, but the intel is not. I am
really lost now.
The NICs *WiFi* function should be a PCIe device, but the USB
connect/disconnect cycles suggest that there's something wrong with the
electrical connection, which presumably causes the PCIe part of the
device to never appear on the bus.