On Wed, Oct 26, 2016 at 01:56:34PM -0700, Brian Norris wrote: > On Wed, Oct 26, 2016 at 01:51:48PM -0700, Rajat Jain wrote: > > On Wed, Oct 26, 2016 at 1:46 PM, Dmitry Torokhov > > <[email protected]> wrote: > > On Wed, Oct 26, 2016 at 01:17:36PM -0700, Brian Norris wrote: > > Sorry, I just saw this... Why do we need devicetree data for > > discoverable bus (PCI)? How does the driver work on systems that do not > > use DT? Why do we need them to behave differently? > > > > There are a couple of out-of-band GPIO pins from Marvell chip that can > > serve as wake-up pins (wake up the CPU when asserted). The Marvell chip > > has to be told which GPIO pin is to be used as the wake-up pin. The pin > > to > > be used is system / platform dependent. (On some systems it could be > > GPIO13, on others it could be GPIO14 etc depending on how the marvell > > chip > > is wired up to the CPU).
So wakeup pin is not wired to PCIe WAKE? > There's also calibration data. See "marvell,caldata*" and > "marvell,wakeup-pin" properties. Currently only for SDIO, in > Documentation/devicetree/bindings/net/wireless/marvell-sd8xxx.txt, but > we're adding support for PCIe. How would it all work if I moved the PCIe module from one device to another? Thanks. -- Dmitry
