Since we got rid of platform data, the driver may use GPIO descriptor directly.
Looking deeply to the use of the GPIO pin it looks like it should be a fixed voltage regulator rather than custom GPIO handling. But this is out of scope of the change. Signed-off-by: Andy Shevchenko <[email protected]> --- drivers/nfc/st21nfca/i2c.c | 40 +++++++++++++--------------------------- 1 file changed, 13 insertions(+), 27 deletions(-) diff --git a/drivers/nfc/st21nfca/i2c.c b/drivers/nfc/st21nfca/i2c.c index 30ef330c9030..941f6f61166e 100644 --- a/drivers/nfc/st21nfca/i2c.c +++ b/drivers/nfc/st21nfca/i2c.c @@ -68,8 +68,7 @@ struct st21nfca_i2c_phy { struct i2c_client *i2c_dev; struct nfc_hci_dev *hdev; - unsigned int gpio_ena; - + struct gpio_desc *gpiod_ena; struct st21nfca_se_status se_status; struct sk_buff *pending_skb; @@ -150,7 +149,7 @@ static int st21nfca_hci_i2c_enable(void *phy_id) { struct st21nfca_i2c_phy *phy = phy_id; - gpio_set_value(phy->gpio_ena, 1); + gpiod_set_value(phy->gpiod_ena, 1); phy->powered = 1; phy->run_mode = ST21NFCA_HCI_MODE; @@ -163,7 +162,7 @@ static void st21nfca_hci_i2c_disable(void *phy_id) { struct st21nfca_i2c_phy *phy = phy_id; - gpio_set_value(phy->gpio_ena, 0); + gpiod_set_value(phy->gpiod_ena, 0); phy->powered = 0; } @@ -506,20 +505,17 @@ static struct nfc_phy_ops i2c_phy_ops = { static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client) { struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); - struct gpio_desc *gpiod_ena; struct device *dev = &client->dev; u8 tmp; /* Get EN GPIO from ACPI */ - gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1, - GPIOD_OUT_LOW); - if (IS_ERR(gpiod_ena)) { + phy->gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 1, + GPIOD_OUT_LOW); + if (IS_ERR(phy->gpiod_ena)) { nfc_err(dev, "Unable to get ENABLE GPIO\n"); - return PTR_ERR(gpiod_ena); + return PTR_ERR(phy->gpiod_ena); } - phy->gpio_ena = desc_to_gpio(gpiod_ena); - phy->se_status.is_ese_present = false; phy->se_status.is_uicc_present = false; @@ -539,31 +535,21 @@ static int st21nfca_hci_i2c_acpi_request_resources(struct i2c_client *client) static int st21nfca_hci_i2c_of_request_resources(struct i2c_client *client) { struct st21nfca_i2c_phy *phy = i2c_get_clientdata(client); + struct device *dev = &client->dev; struct device_node *pp; - int gpio; - int r; pp = client->dev.of_node; if (!pp) return -ENODEV; /* Get GPIO from device tree */ - gpio = of_get_named_gpio(pp, "enable-gpios", 0); - if (gpio < 0) { - nfc_err(&client->dev, "Failed to retrieve enable-gpios from device tree\n"); - return gpio; + phy->gpiod_ena = devm_gpiod_get_index(dev, ST21NFCA_GPIO_NAME_EN, 0, + GPIOD_OUT_HIGH); + if (IS_ERR(phy->gpiod_ena)) { + nfc_err(dev, "Failed to request enable pin\n"); + return PTR_ERR(phy->gpiod_ena); } - /* GPIO request and configuration */ - r = devm_gpio_request_one(&client->dev, gpio, GPIOF_OUT_INIT_HIGH, - ST21NFCA_GPIO_NAME_EN); - if (r) { - nfc_err(&client->dev, "Failed to request enable pin\n"); - return r; - } - - phy->gpio_ena = gpio; - phy->se_status.is_ese_present = of_property_read_bool(pp, "ese-present"); phy->se_status.is_uicc_present = -- 2.11.0
