From: Prameela Rani Garnepudi <prameela.j0...@gmail.com>

Redpine bluetooth driver is a thin driver which depends on
'rsi_91x' driver for transmitting and receiving packets
to/from device. It creates hci interface when attach() is
called from 'rsi_91x' module.

Signed-off-by: Prameela Rani Garnepudi <prameela.j0...@gmail.com>
Signed-off-by: Siva Rebbagondla <siva.rebbagon...@redpinesignals.com>
Signed-off-by: Amitkumar Karwar <amit.kar...@redpinesignals.com>
---
 drivers/bluetooth/Kconfig   |  12 ++
 drivers/bluetooth/Makefile  |   2 +
 drivers/bluetooth/btrsi.c   | 268 ++++++++++++++++++++++++++++++++++++++++++++
 drivers/bluetooth/rsi_hci.h |  51 +++++++++
 4 files changed, 333 insertions(+)
 create mode 100644 drivers/bluetooth/btrsi.c
 create mode 100644 drivers/bluetooth/rsi_hci.h

diff --git a/drivers/bluetooth/Kconfig b/drivers/bluetooth/Kconfig
index 60e1c7d..ca58d74 100644
--- a/drivers/bluetooth/Kconfig
+++ b/drivers/bluetooth/Kconfig
@@ -378,4 +378,16 @@ config BT_QCOMSMD
          Say Y here to compile support for HCI over Qualcomm SMD into the
          kernel or say M to compile as a module.
 
+config BT_RSI
+       tristate "Redpine HCI support"
+       depends on BT && BT_RFCOMM
+       default m
+       help
+         Redpine BT driver.
+         This driver handles BT traffic from upper layers and pass
+         to the RSI_91x coex module for further scheduling to device
+
+         Say Y here to compile support for HCI over Qualcomm SMD into the
+         kernel or say M to compile as a module.
+
 endmenu
diff --git a/drivers/bluetooth/Makefile b/drivers/bluetooth/Makefile
index 4e4e44d..712af83a 100644
--- a/drivers/bluetooth/Makefile
+++ b/drivers/bluetooth/Makefile
@@ -28,6 +28,8 @@ obj-$(CONFIG_BT_QCA)          += btqca.o
 
 obj-$(CONFIG_BT_HCIUART_NOKIA) += hci_nokia.o
 
+obj-$(CONFIG_BT_RSI)           += btrsi.o
+
 btmrvl-y                       := btmrvl_main.o
 btmrvl-$(CONFIG_DEBUG_FS)      += btmrvl_debugfs.o
 
diff --git a/drivers/bluetooth/btrsi.c b/drivers/bluetooth/btrsi.c
new file mode 100644
index 0000000..c52f418
--- /dev/null
+++ b/drivers/bluetooth/btrsi.c
@@ -0,0 +1,268 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+e* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+#include <linux/version.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include "rsi_hci.h"
+
+static struct rsi_mod_ops rsi_bt_ops = {
+       .attach = rsi_hci_attach,
+       .detach = rsi_hci_detach,
+       .recv_pkt = rsi_hci_recv_pkt,
+};
+
+static int rsi_hci_open(struct hci_dev *hdev)
+{
+       BT_INFO("%s open\n", hdev->name);
+
+       return 0;
+}
+
+static int rsi_hci_close(struct hci_dev *hdev)
+{
+       BT_INFO("%s closed\n", hdev->name);
+
+       return 0;
+}
+
+static int rsi_hci_flush(struct hci_dev *hdev)
+{
+       BT_ERR("%s flush\n", hdev->name);
+
+       return 0;
+}
+
+static int rsi_hci_send_pkt(struct hci_dev *hdev, struct sk_buff *skb)
+{
+       struct rsi_hci_adapter *h_adapter;
+       struct sk_buff *new_skb = NULL;
+
+       int status = 0;
+
+       h_adapter = hci_get_drvdata(hdev);
+       if (!h_adapter) {
+               status = -EFAULT;
+               goto fail;
+       }
+
+       if (h_adapter->fsm_state != RSI_BT_FSM_DEVICE_READY) {
+               BT_INFO("BT Device not ready\n");
+               status = -ENODEV;
+               goto fail;
+       }
+
+       if (!test_bit(HCI_RUNNING, &hdev->flags)) {
+               status = -EBUSY;
+               goto fail;
+       }
+
+       switch (bt_cb(skb)->pkt_type) {
+       case HCI_COMMAND_PKT:
+               hdev->stat.cmd_tx++;
+               break;
+
+       case HCI_ACLDATA_PKT:
+               hdev->stat.acl_tx++;
+               break;
+
+       case HCI_SCODATA_PKT:
+               hdev->stat.sco_tx++;
+               break;
+
+       default:
+               dev_kfree_skb(skb);
+               status = -EILSEQ;
+               goto fail;
+       }
+
+       if (skb_headroom(skb) < RSI_HEADROOM_FOR_BT_HAL) {
+               /* Re-allocate one more skb with sufficent headroom */
+               /* Space for Descriptor (16 bytes) is required in head room */
+               u16 new_len = skb->len + RSI_HEADROOM_FOR_BT_HAL;
+
+               new_skb = dev_alloc_skb(new_len);
+               if (!new_skb) {
+                       dev_kfree_skb(skb);
+                       return -ENOMEM;
+               }
+               skb_reserve(new_skb, RSI_HEADROOM_FOR_BT_HAL);
+               skb_put(new_skb, skb->len);
+               memcpy(new_skb->data, skb->data, skb->len);
+               bt_cb(new_skb)->pkt_type = bt_cb(skb)->pkt_type;
+               dev_kfree_skb(skb);
+               skb = new_skb;
+       }
+       if (h_adapter->proto_ops->coex_send_pkt)
+               return h_adapter->proto_ops->coex_send_pkt(h_adapter->priv, skb,
+                                                         RSI_BT_Q);
+
+fail:
+       dev_kfree_skb(skb);
+       return status;
+}
+
+int rsi_hci_recv_pkt(void *priv, u8 *pkt)
+{
+       struct rsi_hci_adapter *h_adapter = (struct rsi_hci_adapter *)priv;
+       struct hci_dev *hdev = NULL;
+       struct sk_buff *skb;
+       int pkt_len = (le16_to_cpu(*(__le16 *)pkt)) & 0x0fff;
+       u8 queue_no = (le16_to_cpu(*(__le16 *)pkt) & 0x7000) >> 12;
+
+       if (h_adapter->fsm_state != RSI_BT_FSM_DEVICE_READY) {
+               BT_INFO("BT Device not ready\n");
+               return 0;
+       }
+
+       if (queue_no == RSI_BT_MGMT_Q) {
+               u8 msg_type = pkt[14] & 0xFF;
+
+               switch (msg_type) {
+               case RSI_RESULT_CONFIRM:
+                       BT_INFO("BT Result Confirm\n");
+                       return 0;
+               case RSI_BT_BER:
+                       BT_INFO("BT Ber\n");
+                       return 0;
+               case RSI_BT_CW:
+                       BT_INFO("BT CW\n");
+                       return 0;
+               default:
+                       break;
+               }
+       }
+
+       skb = dev_alloc_skb(pkt_len);
+       if (!skb)
+               return -ENOMEM;
+
+       hdev = h_adapter->hdev;
+       memcpy(skb->data, pkt + RSI_FRAME_DESC_SIZE, pkt_len);
+       skb_put(skb, pkt_len);
+       h_adapter->hdev->stat.byte_rx += skb->len;
+
+       skb->dev = (void *)hdev;
+       bt_cb(skb)->pkt_type = pkt[14];
+
+       return hci_recv_frame(hdev, skb);
+}
+EXPORT_SYMBOL_GPL(rsi_hci_recv_pkt);
+
+int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops)
+{
+       struct rsi_hci_adapter *h_adapter = NULL;
+       struct hci_dev *hdev;
+       int status = 0;
+
+       h_adapter = kzalloc(sizeof(*h_adapter), GFP_KERNEL);
+       if (!h_adapter)
+               return -ENOMEM;
+
+       h_adapter->priv = priv;
+       ops->set_bt_context(priv, h_adapter);
+       h_adapter->proto_ops = ops;
+       ops->bt_ops = &rsi_bt_ops;
+       h_adapter->fsm_state = RSI_BT_FSM_DEVICE_READY;
+
+       hdev = hci_alloc_dev();
+       if (!hdev) {
+               BT_ERR("Failed to alloc HCI device\n");
+               goto err;
+       }
+       h_adapter->hdev = hdev;
+
+       if (ops->get_host_intf(priv) == RSI_HOST_INTF_SDIO)
+               hdev->bus = HCI_SDIO;
+       else
+               hdev->bus = HCI_USB;
+
+       hci_set_drvdata(hdev, h_adapter);
+       hdev->dev_type = HCI_PRIMARY;
+       hdev->open = rsi_hci_open;
+       hdev->close = rsi_hci_close;
+       hdev->flush = rsi_hci_flush;
+       hdev->send = rsi_hci_send_pkt;
+
+       status = hci_register_dev(hdev);
+       if (status < 0) {
+               BT_ERR("%s: HCI registration failed with errcode %d\n",
+                      __func__, status);
+               goto err;
+       }
+
+       BT_INFO("%s interface created\n", hdev->name);
+
+       h_adapter->fsm_state = RSI_BT_FSM_DEVICE_READY;
+
+       return 0;
+
+err:
+       if (hdev) {
+               hci_unregister_dev(hdev);
+               hci_free_dev(hdev);
+               h_adapter->hdev = NULL;
+       }
+       kfree(h_adapter);
+
+       return -EINVAL;
+}
+
+void rsi_hci_detach(void *priv)
+{
+       struct rsi_hci_adapter *h_adapter = (struct rsi_hci_adapter *)priv;
+       struct hci_dev *hdev;
+
+       if (!h_adapter)
+               return;
+
+       hdev = h_adapter->hdev;
+
+       BT_INFO("Detaching %s\n", hdev->name);
+
+       if (hdev) {
+               hci_unregister_dev(hdev);
+               hci_free_dev(hdev);
+               h_adapter->hdev = NULL;
+       }
+
+       kfree(h_adapter);
+       h_adapter->fsm_state = RSI_BT_FSM_DEVICE_NOT_READY;
+}
+
+struct rsi_mod_ops *rsi_get_hci_ops(void)
+{
+       return &rsi_bt_ops;
+};
+EXPORT_SYMBOL_GPL(rsi_get_hci_ops);
+
+static int rsi_91x_bt_module_init(void)
+{
+       BT_INFO("%s: BT Module init called\n", __func__);
+
+       return 0;
+}
+
+static void rsi_91x_bt_module_exit(void)
+{
+       BT_INFO("%s: BT Module exit called\n", __func__);
+}
+
+module_init(rsi_91x_bt_module_init);
+module_exit(rsi_91x_bt_module_exit);
+MODULE_AUTHOR("Redpine Signals Inc");
+MODULE_DESCRIPTION("RSI BT driver");
+MODULE_SUPPORTED_DEVICE("RSI-BT");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/bluetooth/rsi_hci.h b/drivers/bluetooth/rsi_hci.h
new file mode 100644
index 0000000..6f44231
--- /dev/null
+++ b/drivers/bluetooth/rsi_hci.h
@@ -0,0 +1,51 @@
+/**
+ * Copyright (c) 2017 Redpine Signals Inc.
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
+ * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+ */
+
+#ifndef __RSI_HCI_H__
+#define __RSI_HCI_H__
+
+#include <net/bluetooth/bluetooth.h>
+#include <net/bluetooth/hci_core.h>
+#include <linux/rsi_header.h>
+#include <net/genetlink.h>
+
+/* RX frame types */
+#define RSI_RESULT_CONFIRM                     0x80
+#define RSI_BT_PER                             0x10
+#define RSI_BT_BER                             0x11
+#define RSI_BT_CW                              0x12
+
+#define RSI_HEADROOM_FOR_BT_HAL        16
+
+enum bt_fsm_state {
+       RSI_BT_FSM_DEVICE_NOT_READY = 0,
+       RSI_BT_FSM_DEVICE_READY,
+};
+
+struct rsi_hci_adapter {
+       void *priv;
+       struct rsi_proto_ops *proto_ops;
+       enum bt_fsm_state fsm_state;
+       struct hci_dev *hdev;
+};
+
+#define RSI_FRAME_DESC_SIZE            16
+
+int rsi_hci_attach(void *priv, struct rsi_proto_ops *ops);
+void rsi_hci_detach(void *priv);
+int rsi_hci_recv_pkt(void *data, u8 *pkt);
+
+#endif
-- 
2.7.4

Reply via email to