The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with:
Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: FCC * 5GHz: FCC Signed-off-by: Sven Eckelmann <[email protected]> --- drivers/net/wireless/ath/regd_common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h index 5cbd76235248..07c966ad7a67 100644 --- a/drivers/net/wireless/ath/regd_common.h +++ b/drivers/net/wireless/ath/regd_common.h @@ -59,6 +59,7 @@ enum EnumRd { MKK1_MKKA1 = 0x4A, MKK1_MKKA2 = 0x4B, MKK1_MKKC = 0x4C, + APL2_FCCA = 0x4D, APL3_FCCA = 0x50, APL1_WORLD = 0x52, @@ -189,6 +190,7 @@ static struct reg_dmn_pair_mapping regDomainPairs[] = { {FCC1_FCCA, CTL_FCC, CTL_FCC}, {APL1_WORLD, CTL_FCC, CTL_ETSI}, {APL2_WORLD, CTL_FCC, CTL_ETSI}, + {APL2_FCCA, CTL_FCC, CTL_FCC}, {APL3_WORLD, CTL_FCC, CTL_ETSI}, {APL4_WORLD, CTL_FCC, CTL_ETSI}, {APL5_WORLD, CTL_FCC, CTL_ETSI}, -- 2.11.0
