The regdomain code is used to select the correct the correct conformance test limits (CTL) for a country. If the regdomain code isn't available and it is still programmed in the EEPROM then it will cause an error and stop the initialization with:
Invalid EEPROM contents The current CTL mappings for this regdomain code are: * 2.4GHz: MKK * 5GHz: ETSI Signed-off-by: Sven Eckelmann <[email protected]> --- drivers/net/wireless/ath/regd_common.h | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/wireless/ath/regd_common.h b/drivers/net/wireless/ath/regd_common.h index 07c966ad7a67..44e3831c13b1 100644 --- a/drivers/net/wireless/ath/regd_common.h +++ b/drivers/net/wireless/ath/regd_common.h @@ -72,6 +72,7 @@ enum EnumRd { APL7_FCCA = 0x5C, APL8_WORLD = 0x5D, APL9_WORLD = 0x5E, + APL10_MKKC = 0x5F, WOR0_WORLD = 0x60, WOR1_WORLD = 0x61, @@ -198,6 +199,7 @@ static struct reg_dmn_pair_mapping regDomainPairs[] = { {APL8_WORLD, CTL_ETSI, CTL_ETSI}, {APL9_WORLD, CTL_ETSI, CTL_ETSI}, + {APL10_MKKC, CTL_ETSI, CTL_MKK}, {APL3_FCCA, CTL_FCC, CTL_FCC}, {APL7_FCCA, CTL_FCC, CTL_FCC}, {APL1_ETSIC, CTL_FCC, CTL_ETSI}, -- 2.11.0
