---- Janusz Dziedzic <[email protected]> wrote: > 2018-06-14 6:15 GMT+02:00 <[email protected]>: > > > > ---- [email protected] wrote: > >> > >> ---- [email protected] wrote: > >> > > >> > ---- [email protected] wrote: > >> > > > >> > > ---- Sedat Dilek <[email protected]> wrote: > >> > > > On Tue, May 22, 2018 at 7:21 PM, <[email protected]> wrote: > >> > > > > I've run out of ideas and am hoping someone here can help. > >> > > > > > >> > > > > All I want to do is connect a client to my 5Ghz network. > >> > > > > > >> > > > > My client: > >> > > > > OS is Debian stable "Stretch" with sysvinit instead of systemd > >> > > > > Atheros AR9462 (World roaming 0x64 regdomain in EEPROM) > >> > > > > "iw reg set US" > >> > > > > "iw list" shows both 2.4Ghz and 5Ghz bands available. > >> > > > > "iw wlp3s0 survey dump" shows received traffic on 5Ghz bands. > >> > > > > > >> > > > > There are oodles of 5Ghz AP's within range, but scans (including > >> > > > > passive scans) reveal only 2.4Ghz networks. My only guess was that > >> > > > > it won't transmit due to regulatory requirements, but I cannot > >> > > > > make it work. > >> > > > > > >> > > > > What I've tried: > >> > > > > Running with and without CRDA > >> > > > > Running latest mainline kernel > >> > > > > Hacking around on the ath9k driver and nl80211 to remove all > >> > > > > regulatory enforcement. > >> > > > > > >> > > > > Nothing works and I'm pulling my hair out. Any help would be > >> > > > > greatly appreciated. > >> > > > > >> > > > Hi, > >> > > > > >> > > > I try to give some initial help. > >> > > > > >> > > > The linux-wireless driver is supported by ath9k driver see [1] and > >> > > > [2]. > >> > > > > >> > > > Unfortunately, you have not sent any log-files at least your > >> > > > dmesg-log. > >> > > > No output of the above userspace commands or userspace-tools > >> > > > versions. > >> > > > No information to VendorID/ProductID (PCI, USB, whatever). > >> > > > It's not clear to me if this is a kernelspace (ath9k-driver) or > >> > > > userspace (CRDA/regulatory) problem. > >> > > > How should someone help you effectively? > >> > > > > >> > > > The linux-wireless wiki has somne informations on how to debug > >> > > > Atheros/Qualcomm ath9k-driver, see [3]. > >> > > > > >> > > > As a debianist I say try Linux v4.16 Debian packages from > >> > > > stretch-backports (and maybe a higher version of wireless-regdb). > >> > > > > >> > > > Try to ask questions the smart way [4] :-). > >> > > > > >> > > > Hope this helps. > >> > > > > >> > > > Regards, > >> > > > - Sedat - > >> > > > > >> > > > [1] https://wireless.wiki.kernel.org/en/users/drivers/ath9k > >> > > > [2] https://wireless.wiki.kernel.org/en/users/drivers/ath9k/devices > >> > > > [3] https://wireless.wiki.kernel.org/en/users/drivers/ath9k/debug > >> > > > [4] http://www.catb.org/esr/faqs/smart-questions.html > >> > > > >> > > > >> > > I have also built the latest wireless-regdb and crda, but it made no > >> > > difference. > >> > > >> > > >> > > >> > Did any of the information I posted point towards a cause? > >> > >> > >> Also, I'll gladly send one of these adapters to someone with ath9k > >> experience if they suspect they can make it work. > >> Just message me. :) > > > > > > I'm surprised at the apparent lack of interest in this by anybody > > whatsoever. > > > > Are there any other M.2 cards (both A and E keyed) on the market that > > support dual band with a fully open driver and requiring no proprietary > > firmware? > > > > Maybe it was too good to be true and there is no such thing? > > > > > > Seems, pcie version works fine: > root@test4:~# lspci |grep Atheros > 01:00.0 Network controller: Qualcomm Atheros AR9462 Wireless Network > Adapter (rev 01) > root@test4:~# iw wlp1s0 scan|grep "freq: 5" > freq: 5180 > freq: 5180 > freq: 5180 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5620 > freq: 5745 > freq: 5785 > freq: 5785 > freq: 5745 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5200 > freq: 5200 > freq: 5220 > freq: 5220 > freq: 5785 > freq: 5180 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5540 > freq: 5540 > freq: 5540 > freq: 5540 > freq: 5540 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5200 > freq: 5200 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5220 > freq: 5240 > freq: 5540 > freq: 5540 > freq: 5540 > freq: 5660 > freq: 5745 > freq: 5745 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5785 > freq: 5200 > freq: 5220 > freq: 5785 > freq: 5785 > root@test4:~# uname -a > Linux test4 4.17.0-rc7+ #5 SMP Mon May 28 12:35:22 CEST 2018 x86_64 GNU/Linux > > Added: > ATH_USER_REGD - openwrt patch (4 returns in ath/regd.c) > > I have this card (pcie version) in 10 laptops (in some 2,3 of them) - > working perfectly :) > > BR > Janusz
I have working PCI-E cards with this chipset as well, but M.2 cards with the same chipset (AR9462) do NOT work. Many laptops only have M.2 slots, making the PCI-E solution impossible. Specifically I have laptops from ThinkPenguin which only have an A-keyed M.2 slot. It seems most M.2 cards available are E-keyed, making it difficult to find a compatible card that supports 5Ghz at all. I was excited to find these cards, only to be disappointed when they didn't work.
