From: Tomislav Požega <pozega.tomis...@gmail.com>
Use default value of TX_SW_CFG2 register that is in charge
of LNA timings. Works for somewhat higher RX throughput.
Signed-off-by: Tomislav Požega <pozega.tomis...@gmail.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 463c9117ba06..3d5c78f11ee5 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -5465,7 +5465,7 @@ static int rt2800_init_registers(struct rt2x00_dev
*rt2x00dev)
} else if (rt2x00_rt(rt2x00dev, RT6352)) {
rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401);
rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000);
- rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000);
+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x000C0408);
rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002);
rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F);
rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606);
--
2.7.5
