From: Tomislav Požega <pozega.tomis...@gmail.com>
Register 66 was causing issues on RT6352 if set to the same value as
in MTK driver. With 1c reg value device was working fine in both HT20
and HT40 modes.
Signed-off-by: Tomislav Požega <pozega.tomis...@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgrus...@redhat.com>
---
drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 +-----
1 file changed, 1 insertion(+), 5 deletions(-)
diff --git a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
index 878fbca60f40..463c9117ba06 100644
--- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c
@@ -3981,11 +3981,7 @@ static void rt2800_config_channel(struct rt2x00_dev
*rt2x00dev,
rt2800_bbp_write(rt2x00dev, 196, reg);
/* AGC init */
- if (rt2x00_rt(rt2x00dev, RT6352))
- reg = 0x04;
- else
- reg = rf->channel <= 14 ? 0x1c : 0x24;
-
+ reg = rf->channel <= 14 ? 0x1c : 0x24;
reg += 2 * rt2x00dev->lna_gain;
rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg);
--
2.7.5
