Kalle Valo <[email protected]> wrote: > From: Rakesh Pillai <[email protected]> > > HL2.0 firmware does not support setting quiet mode. If the host driver sends > the quiet mode setting command to the HL2.0 firmware, it crashes with the > below > signature. > > fatal error received: err_qdi.c:456:EX:wlan_process:1:WLAN RT:207a:PC=b001b4f0 > > The quiet mode command support is exposed by the firmware via thermal throttle > wmi service. Enable ath10k thermal support if thermal throttle wmi service bit > is set. 10.x firmware versions support this feature by default, but > unfortunately do not advertise the support via service flags, hence have to > manually set the service flag in ath10k_core_compat_services(). > > Tested on QCA988X with 10.2.4.70.9-2. Also tested on WCN3990. > > Co-developed-by: Govind Singh <[email protected]> > Co-developed-by: Kalle Valo <[email protected]> > Signed-off-by: Rakesh Pillai <[email protected]> > Signed-off-by: Govind Singh <[email protected]> > Signed-off-by: Kalle Valo <[email protected]>
Patch applied to wireless-drivers.git, thanks. 53884577fbce ath10k: skip sending quiet mode cmd for WCN3990 -- https://patchwork.kernel.org/patch/10730831/ https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches
